lkml.org 
[lkml]   [2015]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 00/12] usb: ulpi bus
Hi,

On Tue, Apr 28, 2015 at 04:24:35PM +0300, Heikki Krogerus wrote:
> Hi,
>
> I took the liberty of adding David's ACK to everything except 9/12, including to
> the 1/12 (removing the module handling has no functional affect).
>
> Changes since v2:
> - remove module handling from the bus driver as suggested by Paul Bolle.
> - reordered the gpio requests in BYT quirk as suggested by David Cohen.
>
> Major changes since v1:
> - calling dwc3_phy_setup earlier and registering the ULPI interface there.
> - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
> suggested by Felipe
> - dwc3 soft reset before registration of the ULPI interface to sync the clocks
> as suggested by David
> - Including support for the BYT boards that have the GPIOs controlling the reset
> and cs signals.
>
> Heikki Krogerus (12):
> usb: add bus type for USB ULPI
> usb: dwc3: USB2 PHY register access bits
> usb: dwc3: ULPI or UTMI+ select
> usb: dwc3: store driver data earlier
> usb: dwc3: cache hwparams earlier
> usb: dwc3: soft reset to it's own function
> usb: dwc3: setup phys earlier

up to patch 7/12, I've applied to my testing/next. I'll wait for a
revised 8/12 before applying the rest.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-04-28 20:01    [W:0.123 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site