lkml.org 
[lkml]   [2015]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 0/9] ASoC: tda998x: add a codec to the HDMI transmitter
Hi,
Have you done anything about the tda998x audio support lately?

I was thinking of taking a shot at this now that I finally seem to have
some time for it. However, if you are just about to send another series
I'll wait for that first and see what makes the most sense after that.

My plan is to do something really simple first. No graph bindings or
anything fancy like that. Just a minimal dt-binding to for audio pin
configuration and use simple-card for the rest. I still try to make it
possible to support spdif and i2s at the same time, but I can not test
it as I do not have such HW.

I also try to make the ASoC part as generic as possible, so that it
could be reused by other HDMI encoders with spdif or i2s interface.

Best regards,
Jyri

On 01/20/15 21:35, Jean-Francois Moine wrote:
> Based on broonie/ASoC
>
> v10:
> - add the generic dt-card
> - define the audio ports from a DT graph of ports (Russell King)
> - reuse HDMI constants (Andrew Jackson - Jyri Sarha)
> - alloc rate_constraints in codec (Jyri Sarha)
> - fix bad number of channels (Jyri Sarha)
> - correct codec generation from config (Russell King - Jyri Sarha)
> - no module init/exit (Russell King)
> v9:
> - back to a TDA998x specific CODEC
> - more comments
> - change magic values to constants
> v8:
> - change some comments about the patches
> v7:
> - remove the change of the K predivider (Jyri Sarha)
> - add S24_3LE and S32_LE as possible audio formats (Jyri Sarha)
> - don't move the struct priv2 definition and use the
> slave encoder private data as the device private data
> (Russell King)
> - remove the useless request_module (Russell King/Mark Brown)
> - don't lock the HDMI module (Russell King)
> - use platform_device_unregister to remove the codec
> (Russell King)
> v6:
> - extend the HDMI CODEC instead of using a specific CODEC
> v5:
> - use the TDA998x private data instead of a specific area
> for the CODEC interface
> - the CODEC is TDA998x specific (Mark Brown)
> v4:
> - remove all the TDA998x specific stuff from the CODEC
> - move the EDID scan from the CODEC to the TDA998x
> - move the CODEC to sound/soc (Mark Brown)
> - update the audio_sample_rate from the EDID (Andrew Jackson)
> v3: fix bad rate (Andrew Jackson)
> v2: check double stream start (Mark Brown)
>
> Jean-Francois Moine (9):
> ASoC: kirkwood: dynamically build the DAI array
> ASoC: kirkwood: check the DAI type from the DAI name
> ASoC: kirkwood: accept the DAI definitions from a graph of ports
> drm/i2c: tda998x: Add support of a DT graph of ports
> drm/i2c: tda998x: Change drvdata for audio extension
> ASoC: tda998x: add a codec to the HDMI transmitter
> drm/i2c: tda998x: set cts_n according to the sample width
> ASoC: core: export snd_soc_get_dai_name
> ASoC: add generic dt-card support
>
> .../devicetree/bindings/drm/i2c/tda998x.txt | 51 ++++
> .../devicetree/bindings/sound/mvebu-audio.txt | 30 +++
> drivers/gpu/drm/i2c/tda998x_drv.c | 237 +++++++++++++++++-
> include/sound/soc.h | 2 +
> include/sound/tda998x.h | 32 +++
> sound/soc/codecs/Kconfig | 5 +
> sound/soc/codecs/Makefile | 2 +
> sound/soc/codecs/tda998x.c | 175 +++++++++++++
> sound/soc/generic/Kconfig | 2 +
> sound/soc/generic/Makefile | 2 +
> sound/soc/generic/dt-card.c | 275 +++++++++++++++++++++
> sound/soc/kirkwood/kirkwood-i2s.c | 141 ++++++-----
> sound/soc/kirkwood/kirkwood.h | 4 +-
> sound/soc/soc-core.c | 5 +-
> 14 files changed, 877 insertions(+), 86 deletions(-)
> create mode 100644 include/sound/tda998x.h
> create mode 100644 sound/soc/codecs/tda998x.c
> create mode 100644 sound/soc/generic/dt-card.c
>



\
 
 \ /
  Last update: 2015-04-27 13:41    [W:0.092 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site