lkml.org 
[lkml]   [2015]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] iio: magn: bmc150_magn: Add devicetree binding documentation
On 23/04/15 19:34, Irina Tirdea wrote:
> Add binding documentation for Bosch BMC150 magnetometer.
>
> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
This is trivial enough that I'll happily take it once the 3 weeks from first
posting are up (I'm guessing that still applies to device tree bindings).
> ---
> .../bindings/iio/magnetometer/bmc150_magn.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> new file mode 100644
> index 0000000..9f263b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> @@ -0,0 +1,22 @@
> +* Bosch BMC150 magnetometer sensor
> +
> +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
> +
> +Required properties:
> +
> + - compatible : should be "bosch,bmc150_magn"
> + - reg : the I2C address of the magnetometer
> +
> +Optional properties:
> +
> + - interrupt-parent : phandle to the parent interrupt controller
> + - interrupts : interrupt mapping for GPIO IRQ
> +
> +Example:
> +
> +bmc150_magn@12 {
> + compatible = "bosch,bmc150_magn";
> + reg = <0x12>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <0 1>;
> +};
>



\
 
 \ /
  Last update: 2015-04-26 20:01    [W:0.832 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site