lkml.org 
[lkml]   [2015]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] usb: xhci: plat: Create both HCDs before adding them
Date
As xhci_hcd is now allocated by usb_create_hcd(), we don't
need to add the primary HCD before creating the shared HCD.

Creating the shared HCD before adding the primary HCD is particularly
useful for the OTG use case so that we know at the OTG core if
the HCD is in single configuration or dual (primary + shared)
configuration.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/host/xhci-plat.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 517fb4c..00f23f5 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -136,21 +136,15 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto put_hcd;
}

- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret)
- goto disable_clk;
-
device_wakeup_enable(hcd->self.controller);

- /* USB 2.0 roothub is stored in the platform_device now. */
- hcd = platform_get_drvdata(pdev);
xhci = hcd_to_xhci(hcd);
xhci->clk = clk;
xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
dev_name(&pdev->dev), hcd);
if (!xhci->shared_hcd) {
ret = -ENOMEM;
- goto dealloc_usb2_hcd;
+ goto disable_clk;
}

if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
@@ -160,18 +154,22 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;

- ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto put_usb3_hcd;

- return 0;
+ ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+ if (ret)
+ goto dealloc_usb2_hcd;

-put_usb3_hcd:
- usb_put_hcd(xhci->shared_hcd);
+ return 0;

dealloc_usb2_hcd:
usb_remove_hcd(hcd);

+put_usb3_hcd:
+ usb_put_hcd(xhci->shared_hcd);
+
disable_clk:
if (!IS_ERR(clk))
clk_disable_unprepare(clk);
@@ -189,9 +187,9 @@ static int xhci_plat_remove(struct platform_device *dev)
struct clk *clk = xhci->clk;

usb_remove_hcd(xhci->shared_hcd);
- usb_put_hcd(xhci->shared_hcd);
-
usb_remove_hcd(hcd);
+
+ usb_put_hcd(xhci->shared_hcd);
if (!IS_ERR(clk))
clk_disable_unprepare(clk);
usb_put_hcd(hcd);
--
2.1.0


\
 
 \ /
  Last update: 2015-04-02 15:01    [W:0.150 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site