lkml.org 
[lkml]   [2015]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.19 014/101] ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
Date
3.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@csie.org>

commit fdc0074c5fc8c7adb8186cbb123fe2082d9bd05f upstream.

As the sunxi usb clocks all contain a reset controller, it is not
possible to build the sunxi clock driver without RESET_CONTROLLER
enabled. Doing so results in an undefined symbol error:

drivers/built-in.o: In function `sunxi_gates_clk_setup':
linux/drivers/clk/sunxi/clk-sunxi.c:1071: undefined reference to
`reset_controller_register'

This is possible if building a minimal kernel without PHY_SUN4I_USB.

The dependency issue is made visible at compile time instead of
link time by the new A80 mmc clocks, which also use a reset control
itself.

This patch makes ARCH_SUNXI select ARCH_HAS_RESET_CONTROLLER and
RESET_CONTROLLER.

Fixes: 559482d1f950 ARM: sunxi: Split the various SoCs support in Kconfig
Reported-by: Lourens Rozema <ik@lourensrozema.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/mach-sunxi/Kconfig | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)

--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,10 +1,12 @@
menuconfig ARCH_SUNXI
bool "Allwinner SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select PINCTRL
select SUN4I_TIMER
+ select RESET_CONTROLLER

if ARCH_SUNXI

@@ -20,10 +22,8 @@ config MACH_SUN5I
config MACH_SUN6I
bool "Allwinner A31 (sun6i) SoCs support"
default ARCH_SUNXI
- select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC
select MFD_SUN6I_PRCM
- select RESET_CONTROLLER
select SUN5I_HSTIMER

config MACH_SUN7I
@@ -37,16 +37,12 @@ config MACH_SUN7I
config MACH_SUN8I
bool "Allwinner A23 (sun8i) SoCs support"
default ARCH_SUNXI
- select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC
select MFD_SUN6I_PRCM
- select RESET_CONTROLLER

config MACH_SUN9I
bool "Allwinner (sun9i) SoCs support"
default ARCH_SUNXI
- select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC
- select RESET_CONTROLLER

endif



\
 
 \ /
  Last update: 2015-04-17 16:01    [W:0.368 / U:1.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site