lkml.org 
[lkml]   [2015]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 0/5] PCI: st: provide support for dw pcie
    Date
    Changes in v3:
    - Remove power management functions (was not fully tested)
    - Remove configuration space range from dt binding
    - Remove pci_common_init_dev() call in pcie-designware.c to avoid
    default IO space declaration.

    Changes in v2:
    - comestic corrections in device tree binding
    - add pci-st.c into MAINTAINERS
    - remove st_pcie_ops structure to avoid another level of indirection
    - remove nasty busy-loop
    - remove useless test using virt_to_phys()
    - move disable io support into dw-pcie driver

    I don't change the st_pcie_abort_handler() function because abort handling
    is masked during boot.


    This patch-set introduces a STMicroelectronics PCIe controller.
    It's based on designware PCIe driver.

    Gabriel Fernandez (5):
    ARM: STi: Kconfig update for PCIe support
    PCI: st: Add Device Tree bindings for sti pcie
    PCI: st: Provide support for the sti PCIe controller
    pci: designware: remove pci_common_init_dev()
    MAINTAINERS: Add pci-st.c to ARCH/STI architecture

    Documentation/devicetree/bindings/pci/st-pcie.txt | 53 ++
    MAINTAINERS | 1 +
    arch/arm/mach-sti/Kconfig | 2 +
    drivers/pci/host/Kconfig | 9 +
    drivers/pci/host/Makefile | 1 +
    drivers/pci/host/pci-st.c | 583 ++++++++++++++++++++++
    drivers/pci/host/pcie-designware.c | 62 +--
    drivers/pci/host/pcie-designware.h | 1 +
    8 files changed, 682 insertions(+), 30 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/pci/st-pcie.txt
    create mode 100644 drivers/pci/host/pci-st.c

    --
    1.9.1



    \
     
     \ /
      Last update: 2015-04-10 11:41    [W:8.122 / U:0.600 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site