lkml.org 
[lkml]   [2015]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH v9 16/21] irqchip: Add GICv2 specific ACPI boot support
    Date
    On Wed, 25 Feb 2015 16:39:56 +0800
    , Hanjun Guo <hanjun.guo@linaro.org>
    wrote:
    > From: Tomasz Nowicki <tomasz.nowicki@linaro.org>
    >
    > ACPI kernel uses MADT table for proper GIC initialization. It needs to
    > parse GIC related subtables, collect CPU interface and distributor
    > addresses and call driver initialization function (which is hardware
    > abstraction agnostic). In a similar way, FDT initialize GICv1/2.
    >
    > NOTE: This commit allow to initialize GICv1/2 basic functionality.
    > While now simple GICv2 init call is used, any further GIC features
    > require generic infrastructure for proper ACPI irqchip initialization.
    > That mechanism and stacked irqdomains to support GICv2 MSI/virtualization
    > extension, GICv3/4 and its ITS are considered as next steps.
    >
    > CC: Jason Cooper <jason@lakedaemon.net>
    > CC: Marc Zyngier <marc.zyngier@arm.com>
    > CC: Thomas Gleixner <tglx@linutronix.de>
    > Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
    > Tested-by: Yijing Wang <wangyijing@huawei.com>
    > Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
    > Tested-by: Jon Masters <jcm@redhat.com>
    > Tested-by: Timur Tabi <timur@codeaurora.org>
    > Tested-by: Robert Richter <rrichter@cavium.com>
    > Acked-by: Robert Richter <rrichter@cavium.com>
    > Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
    > Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>

    Reviewed-by: Grant Likely <grant.likely@linaro.org>

    > ---
    > arch/arm64/include/asm/acpi.h | 2 +
    > arch/arm64/kernel/acpi.c | 25 +++++++++
    > drivers/irqchip/irq-gic.c | 102 +++++++++++++++++++++++++++++++++++
    > drivers/irqchip/irqchip.c | 3 ++
    > include/linux/acpi.h | 14 +++++
    > include/linux/irqchip/arm-gic-acpi.h | 29 ++++++++++
    > 6 files changed, 175 insertions(+)
    > create mode 100644 include/linux/irqchip/arm-gic-acpi.h
    >
    > diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
    > index 9a23369..a720a61 100644
    > --- a/arch/arm64/include/asm/acpi.h
    > +++ b/arch/arm64/include/asm/acpi.h
    > @@ -13,6 +13,8 @@
    > #define _ASM_ACPI_H
    >
    > #include <linux/mm.h>
    > +#include <linux/irqchip/arm-gic-acpi.h>
    > +
    > #include <asm/cputype.h>
    > #include <asm/smp_plat.h>
    >
    > diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
    > index 31f080e..af308c3 100644
    > --- a/arch/arm64/kernel/acpi.c
    > +++ b/arch/arm64/kernel/acpi.c
    > @@ -359,3 +359,28 @@ void __init acpi_boot_table_init(void)
    > pr_err("Can't find FADT\n");
    > }
    > }
    > +
    > +void __init acpi_gic_init(void)
    > +{
    > + struct acpi_table_header *table;
    > + acpi_status status;
    > + acpi_size tbl_size;
    > + int err;
    > +
    > + if (acpi_disabled)
    > + return;
    > +
    > + status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size);
    > + if (ACPI_FAILURE(status)) {
    > + const char *msg = acpi_format_exception(status);
    > +
    > + pr_err("Failed to get MADT table, %s\n", msg);
    > + return;
    > + }
    > +
    > + err = gic_v2_acpi_init(table);
    > + if (err)
    > + pr_err("Failed to initialize GIC IRQ controller");
    > +
    > + early_acpi_os_unmap_memory((char *)table, tbl_size);
    > +}
    > diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
    > index 4634cf7..929d668 100644
    > --- a/drivers/irqchip/irq-gic.c
    > +++ b/drivers/irqchip/irq-gic.c
    > @@ -33,12 +33,14 @@
    > #include <linux/of.h>
    > #include <linux/of_address.h>
    > #include <linux/of_irq.h>
    > +#include <linux/acpi.h>
    > #include <linux/irqdomain.h>
    > #include <linux/interrupt.h>
    > #include <linux/percpu.h>
    > #include <linux/slab.h>
    > #include <linux/irqchip/chained_irq.h>
    > #include <linux/irqchip/arm-gic.h>
    > +#include <linux/irqchip/arm-gic-acpi.h>
    >
    > #include <asm/cputype.h>
    > #include <asm/irq.h>
    > @@ -1086,3 +1088,103 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
    > IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
    >
    > #endif
    > +
    > +#ifdef CONFIG_ACPI
    > +static phys_addr_t dist_phy_base, cpu_phy_base __initdata;
    > +
    > +static int __init
    > +gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
    > + const unsigned long end)
    > +{
    > + struct acpi_madt_generic_interrupt *processor;
    > + phys_addr_t gic_cpu_base;
    > + static int cpu_base_assigned;
    > +
    > + processor = (struct acpi_madt_generic_interrupt *)header;
    > +
    > + if (BAD_MADT_ENTRY(processor, end))
    > + return -EINVAL;
    > +
    > + /*
    > + * There is no support for non-banked GICv1/2 register in ACPI spec.
    > + * All CPU interface addresses have to be the same.
    > + */
    > + gic_cpu_base = processor->base_address;
    > + if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
    > + return -EINVAL;
    > +
    > + cpu_phy_base = gic_cpu_base;
    > + cpu_base_assigned = 1;
    > + return 0;
    > +}
    > +
    > +static int __init
    > +gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
    > + const unsigned long end)
    > +{
    > + struct acpi_madt_generic_distributor *dist;
    > +
    > + dist = (struct acpi_madt_generic_distributor *)header;
    > +
    > + if (BAD_MADT_ENTRY(dist, end))
    > + return -EINVAL;
    > +
    > + dist_phy_base = dist->base_address;
    > + return 0;
    > +}
    > +
    > +int __init
    > +gic_v2_acpi_init(struct acpi_table_header *table)
    > +{
    > + void __iomem *cpu_base, *dist_base;
    > + int count;
    > +
    > + /* Collect CPU base addresses */
    > + count = acpi_parse_entries(ACPI_SIG_MADT,
    > + sizeof(struct acpi_table_madt),
    > + gic_acpi_parse_madt_cpu, table,
    > + ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
    > + if (count <= 0) {
    > + pr_err("No valid GICC entries exist\n");
    > + return -EINVAL;
    > + }
    > +
    > + /*
    > + * Find distributor base address. We expect one distributor entry since
    > + * ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
    > + */
    > + count = acpi_parse_entries(ACPI_SIG_MADT,
    > + sizeof(struct acpi_table_madt),
    > + gic_acpi_parse_madt_distributor, table,
    > + ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
    > + if (count <= 0) {
    > + pr_err("No valid GICD entries exist\n");
    > + return -EINVAL;
    > + } else if (count > 1) {
    > + pr_err("More than one GICD entry detected\n");
    > + return -EINVAL;
    > + }
    > +
    > + cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
    > + if (!cpu_base) {
    > + pr_err("Unable to map GICC registers\n");
    > + return -ENOMEM;
    > + }
    > +
    > + dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
    > + if (!dist_base) {
    > + pr_err("Unable to map GICD registers\n");
    > + iounmap(cpu_base);
    > + return -ENOMEM;
    > + }
    > +
    > + /*
    > + * Initialize zero GIC instance (no multi-GIC support). Also, set GIC
    > + * as default IRQ domain to allow for GSI registration and GSI to IRQ
    > + * number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).
    > + */
    > + gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
    > + irq_set_default_host(gic_data[0].domain);
    > + return 0;
    > +}
    > +#endif
    > diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
    > index 0fe2f71..5855240 100644
    > --- a/drivers/irqchip/irqchip.c
    > +++ b/drivers/irqchip/irqchip.c
    > @@ -8,6 +8,7 @@
    > * warranty of any kind, whether express or implied.
    > */
    >
    > +#include <linux/acpi.h>
    > #include <linux/init.h>
    > #include <linux/of_irq.h>
    > #include <linux/irqchip.h>
    > @@ -26,4 +27,6 @@ extern struct of_device_id __irqchip_of_table[];
    > void __init irqchip_init(void)
    > {
    > of_irq_init(__irqchip_of_table);
    > +
    > + acpi_irq_init();
    > }
    > diff --git a/include/linux/acpi.h b/include/linux/acpi.h
    > index c03d8d1..e27117a 100644
    > --- a/include/linux/acpi.h
    > +++ b/include/linux/acpi.h
    > @@ -557,6 +557,20 @@ static inline int acpi_device_modalias(struct device *dev,
    >
    > #endif /* !CONFIG_ACPI */
    >
    > +#if defined(CONFIG_ACPI) && defined(CONFIG_ARM64)
    > +static inline void acpi_irq_init(void)
    > +{
    > + /*
    > + * Hardcode ACPI IRQ chip initialization to GICv2 for now.
    > + * Proper irqchip infrastructure will be implemented along with
    > + * incoming GICv2m|GICv3|ITS bits.
    > + */
    > + acpi_gic_init();
    > +}
    > +#else
    > +static inline void acpi_irq_init(void) { }
    > +#endif
    > +
    > #ifdef CONFIG_ACPI
    > void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state,
    > u32 pm1a_ctrl, u32 pm1b_ctrl));
    > diff --git a/include/linux/irqchip/arm-gic-acpi.h b/include/linux/irqchip/arm-gic-acpi.h
    > new file mode 100644
    > index 0000000..d5b2c79
    > --- /dev/null
    > +++ b/include/linux/irqchip/arm-gic-acpi.h
    > @@ -0,0 +1,29 @@
    > +/*
    > + * Copyright (C) 2014, Linaro Ltd.
    > + * Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
    > + *
    > + * This program is free software; you can redistribute it and/or modify
    > + * it under the terms of the GNU General Public License version 2 as
    > + * published by the Free Software Foundation.
    > + */
    > +
    > +#ifndef ARM_GIC_ACPI_H_
    > +#define ARM_GIC_ACPI_H_
    > +
    > +#ifdef CONFIG_ACPI
    > +
    > +/*
    > + * Hard code here, we can not get memory size from MADT (but FDT does),
    > + * Actually no need to do that, because this size can be inferred
    > + * from GIC spec.
    > + */
    > +#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K)
    > +#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K)
    > +
    > +struct acpi_table_header;
    > +
    > +int gic_v2_acpi_init(struct acpi_table_header *table);
    > +void acpi_gic_init(void);
    > +#endif
    > +
    > +#endif /* ARM_GIC_ACPI_H_ */
    > --
    > 1.9.1
    >



    \
     
     \ /
      Last update: 2015-03-08 00:21    [W:4.917 / U:0.152 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site