lkml.org 
[lkml]   [2015]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/4] input: ft5x06: Allow to set the maximum axes value through the DT
Date
Currently the driver relies on some obscure and undocumented register to set
the maximum axis value.

The reported value is way too high to be meaningful, which confuses some
userspace tools like QT's evdevtouch plugin which try to scale the reported
events to the maximum values.

Use the values from the DT to set meaningful values.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/input/touchscreen/edt-ft5x06.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d4c24fb7704f..cd8a7472266b 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -37,6 +37,7 @@
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
#include <linux/input/edt-ft5x06.h>

#define MAX_SUPPORT_POINTS 5
@@ -1044,6 +1045,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
0, tsdata->num_x * 64 - 1, 0, 0);
input_set_abs_params(input, ABS_MT_POSITION_Y,
0, tsdata->num_y * 64 - 1, 0, 0);
+
+ if (!pdata)
+ touchscreen_parse_of_params(input);
+
error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
if (error) {
dev_err(&client->dev, "Unable to init MT slots.\n");
--
2.3.0


\
 
 \ /
  Last update: 2015-03-03 15:01    [W:2.535 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site