lkml.org 
[lkml]   [2015]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] eeprom: at24: Add support for large EEPROMs connected to SMBus adapters
On 03/19/2015 02:39 PM, Wolfram Sang wrote:
>
>> Turns out this is really easy to reproduce. One process reads
>> the eeprom over and over again, another runs i2cdump in a loop,
>> and voila ... lots of corruptions. Scary, especially considering
>> how wide-spread this kind of i2c access is in the kernel.
>
> A coccinelle script should at least be able to find vulnerable code
> paths, maybe even fix it. But not today for me... Thanks for testing and
> sharing the results!
>

Wolfram,

just to give you an update: I do have some code, but it is a bit messy,
and it doesn't work well for ds2482 (the chip behind it still hangs up
if I access it in parallel through i2c-dev). On top of that, it causes
pretty significant slow-downs when accessing other devices on the same
bus at the same time. Not surprising, I guess, since it expands the scope
of the bus lock significantly.

I thought about introducing a client lock, but that does not work because
of the way i2c-dev is written (creating its own 'shadow' client structure).
An address lock (ie a client lock based on <bus, address> instead of one
residing in the client structure) seems to be too expensive.

So right now I don't really know how to proceed, or if to proceed at all.
I'll think about it some more, but given how wide-spread the problem is
in the kernel, I might just leave it alone, and keep the at24 changes
out of tree.

Ultimately, the real problem is how i2c-dev accesses a client, not how
i2c client drivers (who assume they have exclusive access to a chip)
handle multi-command sequences. Forcing extensive locking on all drivers
because of i2c-dev just doesn't seem to be the right thing to do.

Guenter



\
 
 \ /
  Last update: 2015-03-25 15:41    [W:0.152 / U:1.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site