Messages in this thread | | | Date | Mon, 9 Feb 2015 12:26:32 -0500 | From | Murali Karicheri <> | Subject | Re: [PATCH v6 0/7] PCI: get DMA configuration from parent device |
| |
On 02/09/2015 12:23 AM, Suravee Suthikulpanit wrote: > Sorry for delay response. I have also tested this on AMD Seattle > platform w/ PCI Generic Host Controller, and I can see that the PCI > endpoint devices are getting proper dma_map_ops as set in the host > bridge. > > <Tested-by>: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Suravee,
Thanks for testing this patch.
Murali > > Thanks, > Suravee > > On 02/06/2015 05:52 AM, Murali Karicheri wrote: >> This patch add an important capability to PCI driver on Keystone. I >> hope to >> have this merged to the upstream branch so that it is available for >> v3.20. >> Also would like thank everyone for the contribution. >> >> PCI devices on Keystone doesn't have correct dma_pfn_offset set. This >> patch >> add capability to set the dma configuration such as dma-mask, >> dma_pfn_offset, >> and dma ops etc using the information from DT. The prior RFCs and >> discussions >> are available at [1] and [2] below. >> >> [2] : >> https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg790244.html >> [1] : http://www.gossamer-threads.com/lists/linux/kernel/2024591 >> >> Change history: >> v6 - Rebased to v3.19-v7 >> - Addressed some minor comments about node name and DT size >> validation. >> - Pulled out 8/8 of v5 and plan to send a patch for enhancing >> of_dma_configure() to use size to calculate dma mask. >> - Added Acks from reviewers. >> v5 - moved the dma_mask update in device from ARM specific API to >> of_dma_configure to allow this across other architecture as >> well >> - improved sanity check for DT dma-range size in >> of_dma_configure() >> - moved API to get parent bridge device to PCI (host-bridge.c) >> v4 - moved size adjustments in of_iommu_configure() to a separate >> patch >> - consistent node name comment from Rob >> - patch 6 added for dma_mask adjustment and iommu mapping size >> limiting. >> v3 - addressed comments to re-use of_dma_configure() for PCI >> - To help re-use, change of_iommu_configure() function argument >> - Move of_dma_configure to of/device.c >> - Limit the of_iommu_configure to non pci devices >> v2 - update size to coherent_dma_mask + 1 if dma-range info is >> missing >> - also check the np for null. >> v1 - updates based on the comments against initial RFC. >> - Added a helper function to get the OF node of the parent >> - Added an API in of_pci.c to update DMA configuration of the pci >> device. >> >> Cc: Joerg Roedel <joro@8bytes.org> >> Cc: Grant Likely <grant.likely@linaro.org> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Bjorn Helgaas <bhelgaas@google.com> >> Cc: Will Deacon <will.deacon@arm.com> >> Cc: Russell King <linux@arm.linux.org.uk> >> Cc: Arnd Bergmann <arnd@arndb.de> >> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >> >> Acked-by: Bjorn Helgaas <bhelgaas@google.com> >> Acked-by: Murali Karicheri <m-karicheri2@ti.com> >> >> Murali Karicheri (7): >> of: iommu: add ptr to OF node arg to of_iommu_configure() >> of: move of_dma_configure() to device.c to help re-use >> of: fix size when dma-range is not used >> PCI: add helper functions pci_get[put]_host_bridge_device() >> of/pci: add of_pci_dma_configure() update dma configuration >> PCI: update dma configuration from DT >> arm: dma-mapping: limit iommu mapping size >> >> arch/arm/mm/dma-mapping.c | 7 +++++ >> drivers/iommu/of_iommu.c | 10 ++++-- >> drivers/of/device.c | 74 >> +++++++++++++++++++++++++++++++++++++++++++++ >> drivers/of/of_pci.c | 19 ++++++++++++ >> drivers/of/platform.c | 58 ++--------------------------------- >> drivers/pci/host-bridge.c | 14 +++++++++ >> drivers/pci/probe.c | 2 ++ >> include/linux/of_device.h | 2 ++ >> include/linux/of_iommu.h | 6 ++-- >> include/linux/of_pci.h | 5 +++ >> include/linux/pci.h | 3 ++ >> 11 files changed, 140 insertions(+), 60 deletions(-) >>
-- Murali Karicheri Linux Kernel, Texas Instruments
| |