lkml.org 
[lkml]   [2015]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next] drivers: net: cpsw: make cpsw_ale.c a module to allow re-use on Keystone
On 02/02/2015 11:40 AM, Tony Lindgren wrote:
> * Arnd Bergmann<arnd@arndb.de> [150129 15:51]:
>> On Thursday 29 January 2015 18:15:51 Murali Karicheri wrote:
>>> NetCP on Keystone has cpsw ale function similar to other TI SoCs
>>> and this driver is re-used. To allow both ti cpsw and keystone netcp
>>> to re-use the driver, convert the cpsw ale to a module and configure
>>> it through Kconfig option CONFIG_TI_CPSW_ALE. Currently it is statically
>>> linked to both TI CPSW and NetCP and this causes issues when the above
>>> drivers are built as dynamic modules. This patch addresses this issue
>>>
>>> While at it, fix the Makefile and code to build both netcp_core and
>>> netcp_ethss as dynamic modules. This is needed to support arm allmodconfig.
>>> This also requires exporting of API calls provided by netcp_core so that
>>> both the above can be dynamic modules.
>>>
>>> Signed-off-by: Murali Karicheri<m-karicheri2@ti.com>
>>> ---
>>> drivers/net/ethernet/ti/Kconfig | 19 +++++++++++++++++--
>>> drivers/net/ethernet/ti/Makefile | 8 +++++---
>>> drivers/net/ethernet/ti/cpsw_ale.c | 26 ++++++++++++++++++++++++--
>>> drivers/net/ethernet/ti/netcp_core.c | 8 ++++++++
>>> drivers/net/ethernet/ti/netcp_ethss.c | 5 +++++
>>> 5 files changed, 59 insertions(+), 7 deletions(-)
>>
>> I was hoping there would be a way without exporting all those symbols, but
>> I also couldn't come up with a better solution. I'm putting this into the
>> randconfig build test for now, but I'm guessing it's fine.
>
> Probably the best way in the long run is to add a single exported
> function to cpsw-common.c I just added for the MAC address function.

If understand correctly, what you have done is moved the common mac
function and exported the function in cpsw-common.c and called it from
cpsw.c. How is this any different from exporting all common functions
from cpsw_ale.c as is done today? Not sure what you meant by a single
exported function. Are you talking about defining a ale_ops struct of
function ptrs and exporting that instead of individual functions? So

cpsw_ale_common.c
Move all of the common functions here and define them as static.
Defined cpsw_ale_ops and export it.
cpsw.c and netcp_ethss.c calls something like

cpsw_ale_ops.foo();

Murali

>
> Then all the cpsw like drivers can register with that instead of
> having tons of custom exported functions.
>
> But before doing that, we should have a clear idea what all can
> be shared. Murali, maybe you can take a look at that?
>
> Regards,
>
> Tony


--
Murali Karicheri
Linux Kernel, Texas Instruments


\
 
 \ /
  Last update: 2015-02-06 00:01    [W:0.078 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site