lkml.org 
[lkml]   [2015]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 3/3] vme: tsi148: Master windows support USERx and CR/CSR accesses, not slaves
Date
From: Martyn Welch <martyn.welch@ge.com>

The tsi148 driver is registering the slave images as supporting the "USER"
access modes and CR/CSR access mode rather than the master images as it
should.

Remove the incorrect case entries for these modes from the
tsi148_slave_set() function, stop registering slave_images as supporting
these modes and instead register master windows as supporting these modes.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
---
drivers/vme/bridges/vme_tsi148.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index e07cfa8..895c2a3 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -587,11 +587,6 @@ static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,
granularity = 0x10000;
addr |= TSI148_LCSR_ITAT_AS_A64;
break;
- case VME_CRCSR:
- case VME_USER1:
- case VME_USER2:
- case VME_USER3:
- case VME_USER4:
default:
dev_err(tsi148_bridge->parent, "Invalid address space\n");
return -EINVAL;
@@ -2471,7 +2466,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
master_image->locked = 0;
master_image->number = i;
master_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
- VME_A64;
+ VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 |
+ VME_USER3 | VME_USER4;
master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
@@ -2500,8 +2496,7 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
slave_image->locked = 0;
slave_image->number = i;
slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
- VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 |
- VME_USER3 | VME_USER4;
+ VME_A64;
slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
--
1.9.1


\
 
 \ /
  Last update: 2015-02-26 17:21    [W:0.036 / U:2.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site