lkml.org 
[lkml]   [2015]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] usb: isp1760: add peripheral/device controller chip id
Date
As per the SAF1761 data sheet[0], the DcChipID register represents
the hardware version number (0001h) and the chip ID (1582h) for the
Peripheral Controller.

However as per the ISP1761 data sheet[1], the DcChipID register
represents the hardware version number (0015h) and the chip ID (8210h)
for the Peripheral Controller.

This patch adds support for both the chip ID values.

[0] http://www.nxp.com/documents/data_sheet/SAF1761.pdf
[1] http://pdf.datasheetcatalog.com/datasheets2/74/742102_1.pdf

Cc: Felipe Balbi <balbi@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/usb/isp1760/isp1760-udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

Changes v1->v2:
- Updated to support both chip IDs: 0x00011582 and 0x00158210 instead of
just 0x00158210 as suggested by Laurent

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 9612d7990565..6d618b3fab07 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1411,7 +1411,7 @@ static int isp1760_udc_init(struct isp1760_udc *udc)
return -ENODEV;
}

- if (chipid != 0x00011582) {
+ if (chipid != 0x00011582 && chipid != 0x00158210) {
dev_err(udc->isp->dev, "udc: invalid chip ID 0x%08x\n", chipid);
return -ENODEV;
}
--
1.9.1


\
 
 \ /
  Last update: 2015-02-26 13:21    [W:0.068 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site