Messages in this thread | | | Date | Thu, 26 Feb 2015 12:06:56 +0100 | From | Nicolas Ferre <> | Subject | Re: [PATCH v3] net: macb: Add big endian CPU support |
| |
Le 26/02/2015 12:01, Arun Chandran a écrit : > This patch converts all __raw_readl and __raw_writel function calls > to their corresponding readl_relaxed and writel_relaxed variants. > > It also tells the driver to set ahb_endian_swp_mgmt_en bit in dma_cfg > when the CPU is configured in big endian mode. > > Signed-off-by: Arun Chandran <achandran@mvista.com>
It seems okay: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> --- > This patch is tested on xilinx ZC702 evaluation board with > CONFIG_CPU_BIG_ENDIAN=y and booting NFS rootfs > > changes since initial version: > > * Added on the fly CPU endianness detection according to comments from Michal Simek. > * Corrected GEM_* defines as per comments from Nicolas Ferre. > --- > --- > drivers/net/ethernet/cadence/macb.c | 32 ++++++++++++++++++++++++++------ > drivers/net/ethernet/cadence/macb.h | 18 ++++++++++-------- > 2 files changed, 36 insertions(+), 14 deletions(-) > > diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c > index ad76b8e..1fe8b94 100644 > --- a/drivers/net/ethernet/cadence/macb.c > +++ b/drivers/net/ethernet/cadence/macb.c > @@ -449,7 +449,7 @@ static void macb_update_stats(struct macb *bp) > WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4); > > for(; p < end; p++, reg++) > - *p += __raw_readl(reg); > + *p += readl_relaxed(reg); > } > > static int macb_halt_tx(struct macb *bp) > @@ -1578,6 +1578,7 @@ static u32 macb_dbw(struct macb *bp) > static void macb_configure_dma(struct macb *bp) > { > u32 dmacfg; > + u32 tmp, ncr; > > if (macb_is_gem(bp)) { > dmacfg = gem_readl(bp, DMACFG) & ~GEM_BF(RXBS, -1L); > @@ -1585,7 +1586,24 @@ static void macb_configure_dma(struct macb *bp) > if (bp->dma_burst_length) > dmacfg = GEM_BFINS(FBLDO, bp->dma_burst_length, dmacfg); > dmacfg |= GEM_BIT(TXPBMS) | GEM_BF(RXBMS, -1L); > - dmacfg &= ~GEM_BIT(ENDIA); > + dmacfg &= ~GEM_BIT(ENDIA_PKT); > + > + /* Find the CPU endianness by using the loopback bit of net_ctrl > + * register. save it first. When the CPU is in big endian we > + * need to program swaped mode for management descriptor access. > + */ > + ncr = macb_readl(bp, NCR); > + __raw_writel(MACB_BIT(LLB), bp->regs + MACB_NCR); > + tmp = __raw_readl(bp->regs + MACB_NCR); > + > + if (tmp == MACB_BIT(LLB)) > + dmacfg &= ~GEM_BIT(ENDIA_DESC); > + else > + dmacfg |= GEM_BIT(ENDIA_DESC); /* CPU in big endian */ > + > + /* Restore net_ctrl */ > + macb_writel(bp, NCR, ncr); > + > if (bp->dev->features & NETIF_F_HW_CSUM) > dmacfg |= GEM_BIT(TXCOEN); > else > @@ -1832,14 +1850,14 @@ static void gem_update_stats(struct macb *bp) > > for (i = 0; i < GEM_STATS_LEN; ++i, ++p) { > u32 offset = gem_statistics[i].offset; > - u64 val = __raw_readl(bp->regs + offset); > + u64 val = readl_relaxed(bp->regs + offset); > > bp->ethtool_stats[i] += val; > *p += val; > > if (offset == GEM_OCTTXL || offset == GEM_OCTRXL) { > /* Add GEM_OCTTXH, GEM_OCTRXH */ > - val = __raw_readl(bp->regs + offset + 4); > + val = readl_relaxed(bp->regs + offset + 4); > bp->ethtool_stats[i] += ((u64)val) << 32; > *(++p) += val; > } > @@ -2191,12 +2209,14 @@ static void macb_probe_queues(void __iomem *mem, > *num_queues = 1; > > /* is it macb or gem ? */ > - mid = __raw_readl(mem + MACB_MID); > + mid = readl_relaxed(mem + MACB_MID); > + > if (MACB_BFEXT(IDNUM, mid) != 0x2) > return; > > /* bit 0 is never set but queue 0 always exists */ > - *queue_mask = __raw_readl(mem + GEM_DCFG6) & 0xff; > + *queue_mask = readl_relaxed(mem + GEM_DCFG6) & 0xff; > + > *queue_mask |= 0x1; > > for (hw_q = 1; hw_q < MACB_MAX_QUEUES; ++hw_q) > diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h > index 31dc080..83241c8 100644 > --- a/drivers/net/ethernet/cadence/macb.h > +++ b/drivers/net/ethernet/cadence/macb.h > @@ -229,8 +229,10 @@ > /* Bitfields in DMACFG. */ > #define GEM_FBLDO_OFFSET 0 /* fixed burst length for DMA */ > #define GEM_FBLDO_SIZE 5 > -#define GEM_ENDIA_OFFSET 7 /* endian swap mode for packet data access */ > -#define GEM_ENDIA_SIZE 1 > +#define GEM_ENDIA_DESC_OFFSET 6 /* endian swap mode for management descriptor access */ > +#define GEM_ENDIA_DESC_SIZE 1 > +#define GEM_ENDIA_PKT_OFFSET 7 /* endian swap mode for packet data access */ > +#define GEM_ENDIA_PKT_SIZE 1 > #define GEM_RXBMS_OFFSET 8 /* RX packet buffer memory size select */ > #define GEM_RXBMS_SIZE 2 > #define GEM_TXPBMS_OFFSET 10 /* TX packet buffer memory size select */ > @@ -423,17 +425,17 @@ > > /* Register access macros */ > #define macb_readl(port,reg) \ > - __raw_readl((port)->regs + MACB_##reg) > + readl_relaxed((port)->regs + MACB_##reg) > #define macb_writel(port,reg,value) \ > - __raw_writel((value), (port)->regs + MACB_##reg) > + writel_relaxed((value), (port)->regs + MACB_##reg) > #define gem_readl(port, reg) \ > - __raw_readl((port)->regs + GEM_##reg) > + readl_relaxed((port)->regs + GEM_##reg) > #define gem_writel(port, reg, value) \ > - __raw_writel((value), (port)->regs + GEM_##reg) > + writel_relaxed((value), (port)->regs + GEM_##reg) > #define queue_readl(queue, reg) \ > - __raw_readl((queue)->bp->regs + (queue)->reg) > + readl_relaxed((queue)->bp->regs + (queue)->reg) > #define queue_writel(queue, reg, value) \ > - __raw_writel((value), (queue)->bp->regs + (queue)->reg) > + writel_relaxed((value), (queue)->bp->regs + (queue)->reg) > > /* Conditional GEM/MACB macros. These perform the operation to the correct > * register dependent on whether the device is a GEM or a MACB. For registers >
-- Nicolas Ferre
| |