lkml.org 
[lkml]   [2015]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] mtd: nand: pxa3xx: Fix PIO FIFO draining
On 02/16/2015 09:51 AM, Maxime Ripard wrote:
> The NDDB register holds the data that are needed by the read and write
> commands.
>
> However, during a read PIO access, the datasheet specifies that after each 32
> bits read in that register, when BCH is enabled, we have to make sure that the
> RDDREQ bit is set in the NDSR register.
>

Typo s/32 bits/32 bytes

--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-02-16 15:01    [W:0.152 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site