lkml.org 
[lkml]   [2015]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/10] mtd: pxa3xx_nand: add a default chunk size
On Thu, 12 Feb 2015 15:53:31 +0100
Antoine Tenart <antoine.tenart@free-electrons.com> wrote:

> Add a default chunk size of 512 in the pxa3xx nand driver.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> ---
> drivers/mtd/nand/pxa3xx_nand.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 64628bff3fa5..8ed045195d31 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -1430,6 +1430,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
> if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
> goto KEEP_CONFIG;
>
> + /* Set a default chunk size */

Ditto => no explanation about why you do that.

> + info->chunk_size = 512;
> +
> ret = pxa3xx_nand_sensing(info);
> if (ret) {
> dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",



--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-02-12 16:41    [W:0.078 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site