lkml.org 
[lkml]   [2015]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/11] mfd: add the Berlin controller driver
Date
Marvell Berlin SoC have two nodes providing multiple devices (clk,
pinctrl, reset). While until now these drivers were initialized using
initcalls, this wasn't a proper solution. This mfd driver will be
responsible of adding these devices, to be probed properly.

It currently registers the pin controllers and the reset drivers for
BG2, BG2CD and BG2Q in the soc and system controller nodes.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
drivers/mfd/Kconfig | 5 ++
drivers/mfd/Makefile | 2 +
drivers/mfd/berlin-ctrl.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 187 insertions(+)
create mode 100644 drivers/mfd/berlin-ctrl.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2e6b7311fabc..eda6dbec02ff 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -840,6 +840,11 @@ config STMPE_SPI
This is used to enable SPI interface of STMPE
endmenu

+config MFD_BERLIN_CTRL
+ bool
+ select MFD_CORE
+ select MFD_SYSCON
+
config MFD_STA2X11
bool "STMicroelectronics STA2X11"
depends on STA2X11
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e211381..adf60e85df20 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -179,3 +179,5 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o

intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
+
+obj-$(CONFIG_MFD_BERLIN_CTRL) += berlin-ctrl.o
diff --git a/drivers/mfd/berlin-ctrl.c b/drivers/mfd/berlin-ctrl.c
new file mode 100644
index 000000000000..e3ce6f069f16
--- /dev/null
+++ b/drivers/mfd/berlin-ctrl.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+struct berlin_ctrl_priv {
+ const struct mfd_cell *devs;
+ unsigned ndevs;
+};
+
+/*
+ * BG2 devices
+ */
+static const struct mfd_cell berlin2_ctrl_chip_ctrl_subdevs[] = {
+ {
+ .name = "berlin2-soc-pinctrl",
+ .of_compatible = "marvell,berlin2-soc-pinctrl",
+ },
+ {
+ .name = "berlin2-reset",
+ .of_compatible = "marvell,berlin2-reset",
+ },
+};
+
+static const struct mfd_cell berlin2_ctrl_system_ctrl_subdevs[] = {
+ {
+ .name = "berlin2-system-pinctrl",
+ .of_compatible = "marvell,berlin2-system-pinctrl",
+ },
+};
+
+static const struct berlin_ctrl_priv berlin2_ctrl_chip_ctrl_data = {
+ .devs = berlin2_ctrl_chip_ctrl_subdevs,
+ .ndevs = ARRAY_SIZE(berlin2_ctrl_chip_ctrl_subdevs),
+};
+
+static const struct berlin_ctrl_priv berlin2_ctrl_system_data = {
+ .devs = berlin2_ctrl_system_ctrl_subdevs,
+ .ndevs = ARRAY_SIZE(berlin2_ctrl_system_ctrl_subdevs),
+};
+
+
+/*
+ * BG2CD devices
+ */
+static const struct mfd_cell berlin2cd_ctrl_chip_ctrl_subdevs[] = {
+ {
+ .name = "berlin2cd-soc-pinctrl",
+ .of_compatible = "marvell,berlin2cd-soc-pinctrl",
+ },
+ {
+ .name = "berlin2-reset",
+ .of_compatible = "marvell,berlin2-reset",
+ },
+};
+
+static const struct mfd_cell berlin2cd_ctrl_system_ctrl_subdevs[] = {
+ {
+ .name = "berlin2cd-system-pinctrl",
+ .of_compatible = "marvell,berlin2cd-system-pinctrl",
+ },
+};
+
+static const struct berlin_ctrl_priv berlin2cd_ctrl_chip_ctrl_data = {
+ .devs = berlin2cd_ctrl_chip_ctrl_subdevs,
+ .ndevs = ARRAY_SIZE(berlin2cd_ctrl_chip_ctrl_subdevs),
+};
+
+static const struct berlin_ctrl_priv berlin2cd_ctrl_system_data = {
+ .devs = berlin2cd_ctrl_system_ctrl_subdevs,
+ .ndevs = ARRAY_SIZE(berlin2cd_ctrl_system_ctrl_subdevs),
+};
+
+/*
+ * BG2Q devices
+ */
+static const struct mfd_cell berlin2q_ctrl_chip_ctrl_subdevs[] = {
+ {
+ .name = "berlin2q-soc-pinctrl",
+ .of_compatible = "marvell,berlin2q-soc-pinctrl",
+ },
+ {
+ .name = "berlin2-reset",
+ .of_compatible = "marvell,berlin2-reset",
+ },
+};
+
+static const struct mfd_cell berlin2q_ctrl_system_ctrl_subdevs[] = {
+ {
+ .name = "berlin2q-system-pinctrl",
+ .of_compatible = "marvell,berlin2q-system-pinctrl",
+ },
+};
+
+static const struct berlin_ctrl_priv berlin2q_ctrl_chip_ctrl_data = {
+ .devs = berlin2q_ctrl_chip_ctrl_subdevs,
+ .ndevs = ARRAY_SIZE(berlin2q_ctrl_chip_ctrl_subdevs),
+};
+
+static const struct berlin_ctrl_priv berlin2q_ctrl_system_data = {
+ .devs = berlin2q_ctrl_system_ctrl_subdevs,
+ .ndevs = ARRAY_SIZE(berlin2q_ctrl_system_ctrl_subdevs),
+};
+
+
+static const struct of_device_id berlin_ctrl_of_match[] = {
+ /* BG2 */
+ {
+ .compatible = "marvell,berlin2-chip-ctrl",
+ .data = &berlin2_ctrl_chip_ctrl_data,
+ },
+ {
+ .compatible = "marvell,berlin2-system-ctrl",
+ .data = &berlin2_ctrl_system_data,
+ },
+ /* BG2CD */
+ {
+ .compatible = "marvell,berlin2cd-chip-ctrl",
+ .data = &berlin2cd_ctrl_chip_ctrl_data,
+ },
+ {
+ .compatible = "marvell,berlin2cd-system-ctrl",
+ .data = &berlin2cd_ctrl_system_data,
+ },
+ /* BG2Q */
+ {
+ .compatible = "marvell,berlin2q-chip-ctrl",
+ .data = &berlin2q_ctrl_chip_ctrl_data,
+ },
+ {
+ .compatible = "marvell,berlin2q-system-ctrl",
+ .data = &berlin2q_ctrl_system_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, berlin_ctrl_of_match);
+
+static int berlin_ctrl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ const struct berlin_ctrl_priv *priv;
+ int ret;
+
+ match = of_match_node(berlin_ctrl_of_match, dev->of_node);
+ if (!match)
+ return -EINVAL;
+
+ priv = match->data;
+
+ ret = mfd_add_devices(dev, 0, priv->devs, priv->ndevs, NULL, -1, NULL);
+ if (ret) {
+ dev_err(dev, "Failed to add devices: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver berlin_ctrl_driver = {
+ .probe = berlin_ctrl_probe,
+ .driver = {
+ .name = "berlin-ctrl",
+ .of_match_table = berlin_ctrl_of_match,
+ },
+};
+module_platform_driver(berlin_ctrl_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell Berlin controller driver (mfd)");
+MODULE_LICENSE("GPL");
--
2.3.0


\
 
 \ /
  Last update: 2015-02-11 17:21    [W:0.166 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site