lkml.org 
[lkml]   [2015]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 1/2] video:omap2:dss: fix timings for VENC to match what omapdrm expects
From
Date

On 13/11/15 12:29, H. Nikolaus Schaller wrote:
> Otherwise check_timings fails and we get a "has no modes" message
> from xrandr.
>
> This fix makes the venc assume PAL and NTSC timings that match the
> timings synthetized by copy_timings_drm_to_omap() from omapdrm
> mode settings so that check_timings() succeeds.
>
> Tested on: BeagleBoard XM, GTA04 and OpenPandora
>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
> drivers/video/fbdev/omap2/dss/venc.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)

I've picked this up.

With this patch and the one below I can get tv-out working on my very old
beagleboard, and it seems to work with X also. It doesn't start automatically
as the connection state is unknown, but doing "xrandr --output None-1 --auto"
was all I needed to enable it.

Tomi

From a4274600a5a67256b91266b0d2624b9c9028909b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 8 Dec 2015 18:32:14 +0200
Subject: [PATCH] drm/omap: fix fbdev pix format to support all platforms

omap_fbdev always creates a framebuffer with ARGB8888 pixel format. On
OMAP3 we have VIDEO1 overlay that does not support ARGB8888, and on
OMAP2 none of the overlays support ARGB888.

This patch changes the omap_fbdev's fb to XRGB8888, which is supported
by all platforms.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
index b8e4cdec28c3..24f92bea39c7 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
@@ -112,11 +112,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper,
dma_addr_t paddr;
int ret;

- /* only doing ARGB32 since this is what is needed to alpha-blend
- * with video overlays:
- */
sizes->surface_bpp = 32;
- sizes->surface_depth = 32;
+ sizes->surface_depth = 24;

DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width,
sizes->surface_height, sizes->surface_bpp,
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-12-09 09:41    [W:0.080 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site