lkml.org 
[lkml]   [2015]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 04/10] ARM: STi: STiH407: Provide generic (safe) DVFS configuration
Date
You'll notice that the voltage cell is populated with 0's.  Voltage
information is very platform specific, even depends on 'cut' and
'substrate' versions. Thus it is left blank for a generic (safe)
implementation. If other nodes/properties are provided by the
bootloader, the ST CPUFreq driver will over-ride these generic
values.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/boot/dts/stih407-family.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 81f8121..9fa1e58 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -22,15 +22,29 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
cpu-release-addr = <0x94100A4>;
+
+ /* kHz uV */
+ operating-points = <1500000 0
+ 1200000 0
+ 800000 0
+ 500000 0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
cpu-release-addr = <0x94100A4>;
+
+ /* kHz uV */
+ operating-points = <1500000 0
+ 1200000 0
+ 800000 0
+ 500000 0>;
};
};

--
1.9.1


\
 
 \ /
  Last update: 2015-12-09 17:21    [W:0.076 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site