lkml.org 
[lkml]   [2015]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/2] video: fbdev: pxafb: initial devicetree conversion
From
Date

On 17/11/15 22:32, Robert Jarzmik wrote:
> This patch brings a first support of pxa framebuffer devices to a
> devicetree pxa platform, as was before platform data.
>
> There are restrictions with this port, the biggest one being the lack of
> support of smart panels. Moreover the conversion doesn't provide a way
> to declare multiple framebuffer configurations with different bits per
> pixel, only the LCD hardware bus width is used.
>
> The patch was tested on both pxa25x, pxa27x and pxa3xx platform (namely
> lubbock, mainstone and zylonite).
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
> Since v1: Philipp's review: of_graph usage
> Since v3: of_device_id sentinel, and all compatible ids added
> Since v4: fixed of_device_id table : rebase error on my side, with
> braces which were incorrectly added
> ---
> drivers/video/fbdev/Kconfig | 2 +
> drivers/video/fbdev/pxafb.c | 163 +++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 162 insertions(+), 3 deletions(-)

I see we already have
Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt in the
mainline. I think the patch adding the binding doc should have been kept
in this series.

It seems that at least "depth" is missing from the binding document.

Tomi

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-12-07 17:41    [W:0.107 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site