lkml.org 
[lkml]   [2015]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] extcon: add Maxim MAX3355 driver
Hi,

On 2015년 12월 21일 02:15, Sergei Shtylyov wrote:
> Hello.
>
> On 12/20/2015 05:31 PM, Chanwoo Choi wrote:
>
>> This patch depend on GPIOLIB configuration as following:
>> I modified it with following diff and applied it.
>>
>> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
>> index ba4db7d..3d89e60 100644
>> --- a/drivers/extcon/Kconfig
>> +++ b/drivers/extcon/Kconfig
>> @@ -54,6 +54,7 @@ config EXTCON_MAX14577
>>
>> config EXTCON_MAX3355
>> tristate "Maxim MAX3355 USB OTG EXTCON Support"
>> + depends on GPIOLIB || COMPILE_TEST
>
> If it won't compile w/o gpiolib, what's the use of COMIPLE_TEST?
> And no, it shouldn't depend on gpiolib. It has empty stubs for the case of CONFIG_GPIOLIB=n. Obviously something is wrong with the GPIO headers, I'll look into it.

Yes. When GPIOLIB is disabled, the build issue don't happen.
because include/linux/gpio/consumer.h implement the dummy function
for all gpio functions if CONFIG_GPIOLIB is disabled.

For correct operation of max3355, you should add the dependency
to the extcon-max3355.c driver. This driver use the GPIO library
certainly.

COMPILE_TEST is used for just build test. You can see the detailed data[1].
[1] https://lkml.org/lkml/2013/5/22/155

Thanks,
Chanwoo Choi


\
 
 \ /
  Last update: 2015-12-21 04:01    [W:0.042 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site