lkml.org 
[lkml]   [2015]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm: pxa: create a unified defconfig for PXA27X-DT
Date
Instead of one defconfig file per board, pxa27x-dt_defconfig
is expected to provide a configuration for kernel which can test any
PXA27X-DT compatible board

Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
CC: Robert Jarzmik <robert.jarzmik@free.fr>
CC: Arnd Bergmann <arnd@arndb.de>
---
Documentation/arm/pxa/pxa27x_defconfig.txt | 7 ++
arch/arm/configs/pxa27x-dt_defconfig | 102 +++++++++++++++++++++++++++++
2 files changed, 109 insertions(+)
create mode 100644 Documentation/arm/pxa/pxa27x_defconfig.txt
create mode 100644 arch/arm/configs/pxa27x-dt_defconfig

diff --git a/Documentation/arm/pxa/pxa27x_defconfig.txt b/Documentation/arm/pxa/pxa27x_defconfig.txt
new file mode 100644
index 0000000..fc4e164
--- /dev/null
+++ b/Documentation/arm/pxa/pxa27x_defconfig.txt
@@ -0,0 +1,7 @@
+If you are reading this, because you are adding support for a new
+PXA27X board, please note that you should not create an additional
+defconfig in arch/arm/configs.
+
+Instead, please update arch/arm/configs/pxa27x-dt_defconfig so that
+a kernel built with this config after `make olddefconfig` boots your
+board.
diff --git a/arch/arm/configs/pxa27x-dt_defconfig b/arch/arm/configs/pxa27x-dt_defconfig
new file mode 100644
index 0000000..003be48
--- /dev/null
+++ b/arch/arm/configs/pxa27x-dt_defconfig
@@ -0,0 +1,102 @@
+## Kernel built with this config should boot any supported PXA27X-DT board
+## Please see Documentation/arm/pxa/pxa27x_defconfig.txt for details
+##
+CONFIG_ARM=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_CMDLINE_PARSER=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_PXA=y
+CONFIG_MACH_PXA27X_DT=y
+CONFIG_PXA_SYSTEMS_CPLDS=y
+CONFIG_PXA_SSP=y
+CONFIG_CPU_FREQ=y
+CONFIG_ARM_PXA2xx_CPUFREQ=y
+CONFIG_NET=y
+CONFIG_IRDA=y
+CONFIG_PXA_FICP=y
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PXA2XX=y
+CONFIG_OF=y
+CONFIG_OF_FLATTREE=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+CONFIG_ATA_BMDMA=y
+CONFIG_PATA_PXA=y
+CONFIG_NETDEVICES=y
+CONFIG_DM9000=y
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_NAVPOINT_PXA27x=y
+CONFIG_TTY=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=40
+CONFIG_SERIAL_8250_RUNTIME_UARTS=40
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_PXA=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_PXA=y
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_PXA27x=y
+CONFIG_FB=y
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_SMARTPANEL=y
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_AC97=y
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PXA27X=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PXA=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_OF=y
+CONFIG_PXA_DMA=y
+CONFIG_PWM=y
+CONFIG_PWM_PXA=y
+CONFIG_EXT4_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
--
2.6.3


\
 
 \ /
  Last update: 2015-12-19 09:01    [W:0.183 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site