lkml.org 
[lkml]   [2015]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 10/10] arm64: dts: Enable the Thermal on R88 board
Date
This patch enable the TS-ADC.

When a thermal temperature is invoked use the CRU to reset the chip
on R88 board. TSHUT is low active on this board.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>

---

Changes in v3: None
Changes in v2: None
Changes in v1: None

arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 401a812..7684426a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -336,6 +336,12 @@
status = "okay";
};

+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+}
+
&uart2 {
status = "okay";
};
--
1.9.1


\
 
 \ /
  Last update: 2015-11-08 10:41    [W:0.048 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site