lkml.org 
[lkml]   [2015]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v7 1/6] dt-bindings: add documentation of rk3036 clock controller
    Date
    Add the devicetree binding for the cru on the rk3036 which quite similar
    structured as previous clock controllers.


    Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
    Reviewed-by: Heiko Stuebner <heiko@sntech.de>
    Acked-by: Rob Herring <robh@kernel.org>
    ---

    Changes in v7: None

    .../bindings/clock/rockchip,rk3036-cru.txt | 56 ++++++++++++++++++++
    1 file changed, 56 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt

    diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
    new file mode 100644
    index 0000000..ace0599
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
    @@ -0,0 +1,56 @@
    +* Rockchip RK3036 Clock and Reset Unit
    +
    +The RK3036 clock controller generates and supplies clock to various
    +controllers within the SoC and also implements a reset controller for SoC
    +peripherals.
    +
    +Required Properties:
    +
    +- compatible: should be "rockchip,rk3036-cru"
    +- reg: physical base address of the controller and length of memory mapped
    + region.
    +- #clock-cells: should be 1.
    +- #reset-cells: should be 1.
    +
    +Optional Properties:
    +
    +- rockchip,grf: phandle to the syscon managing the "general register files"
    + If missing pll rates are not changeable, due to the missing pll lock status.
    +
    +Each clock is assigned an identifier and client nodes can use this identifier
    +to specify the clock which they consume. All available clocks are defined as
    +preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
    +used in device tree sources. Similar macros exist for the reset sources in
    +these files.
    +
    +External clocks:
    +
    +There are several clocks that are generated outside the SoC. It is expected
    +that they are defined using standard clock bindings with following
    +clock-output-names:
    + - "xin24m" - crystal input - required,
    + - "ext_i2s" - external I2S clock - optional,
    + - "ext_gmac" - external GMAC clock - optional
    +
    +Example: Clock controller node:
    +
    + cru: cru@20000000 {
    + compatible = "rockchip,rk3036-cru";
    + reg = <0x20000000 0x1000>;
    + rockchip,grf = <&grf>;
    +
    + #clock-cells = <1>;
    + #reset-cells = <1>;
    + };
    +
    +Example: UART controller node that consumes the clock generated by the clock
    + controller:
    +
    + uart0: serial@20060000 {
    + compatible = "snps,dw-apb-uart";
    + reg = <0x20060000 0x100>;
    + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
    + reg-shift = <2>;
    + reg-io-width = <4>;
    + clocks = <&cru SCLK_UART0>;
    + };
    --
    1.7.9.5



    \
     
     \ /
      Last update: 2015-11-05 08:41    [W:2.882 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site