lkml.org 
[lkml]   [2015]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] arm64: dts: exynos7: Enable HS200 mode operation
Date
This patch enables HS200 mode operation on exynos7 based
espresso board.
This also removes _broken-cd_ property as per mmc binding documentation
which says one of the properties between broken-cd and non-removable
should be used. And we already use _non-removable_ as emmc mounted
on board which is a non-removable device.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes since v1:
* Addressed Krzysztof review comments

arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index f5a3da50ac57..d8767b00862e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -333,8 +333,8 @@
&mmc_0 {
status = "okay";
num-slots = <1>;
- broken-cd;
cap-mmc-highspeed;
+ mmc-hs200-1_8v;
non-removable;
card-detect-delay = <200>;
clock-frequency = <800000000>;
--
1.7.10.4


\
 
 \ /
  Last update: 2015-11-05 13:21    [W:0.042 / U:1.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site