Messages in this thread | | | Date | Wed, 4 Nov 2015 16:57:38 -0600 | From | Rob Herring <> | Subject | Re: [PATCH v3 3/6] Documentation: tps65086: Add DT bindings for the TPS65086 GPO controller |
| |
On Wed, Nov 04, 2015 at 11:12:12AM -0600, Andrew F. Davis wrote: > The TPS65086 PMIC contains several regulators and a GPO controller. > Add bindings for the TPS65086 GPO controller. > > Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
> --- > Documentation/devicetree/bindings/gpio/gpio-tps65086.txt | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt > new file mode 100644 > index 0000000..ba05107 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt > @@ -0,0 +1,16 @@ > +* TPS65086 GPO Controller bindings > + > +Required properties: > + - compatible : Should be "ti,tps65086-gpio". > + - gpio-controller : Marks the device node as a GPIO Controller. > + - #gpio-cells : Should be two. The first cell is the pin number > + and the second cell is used to specify flags. > + See ../gpio/gpio.txt for possible values. > + > +Example: > + > + gpio4: gpio { > + compatible = "ti,tps65086-gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + }; > -- > 1.9.1 >
| |