lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 27/28] dt-bindings: mips: img,boston: Document img,boston binding
On Mon, Nov 30, 2015 at 04:21:52PM +0000, Paul Burton wrote:
> Add documentation for the simple img,boston devicetree binding & the
> boot protocol used to pass the devicetree to the kernel.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
>
> Documentation/devicetree/bindings/mips/img/boston.txt | 15 +++++++++++++++
> MAINTAINERS | 5 +++++
> 2 files changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mips/img/boston.txt
>
> diff --git a/Documentation/devicetree/bindings/mips/img/boston.txt b/Documentation/devicetree/bindings/mips/img/boston.txt
> new file mode 100644
> index 0000000..27b2806
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/img/boston.txt
> @@ -0,0 +1,15 @@
> +Imagination Technologies Boston Development Board
> +=================================================
> +
> +Required properties:
> +--------------------
> + - compatible: Must be "img,boston".
No SOC compatible in addition?

> +
> +Boot protocol:
> +--------------
> +In accordance with the MIPS UHI specification[1], the bootloader must pass the
> +following arguments to the kernel:
> + - $a0: -2.
> + - $a1: KSEG0 address of the flattened device-tree blob.

If this is standard, I don't know that we need to repeat it for every
board.

Rob

> +
> +[1] http://prplfoundation.org/wiki/MIPS_documentation


\
 
 \ /
  Last update: 2015-11-30 20:01    [W:0.048 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site