lkml.org 
[lkml]   [2015]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v2] arm, am335x: add support for the bosch shc board
    * Heiko Schocher <hs@denx.de> [151129 22:51]:
    > Hello all,
    >
    > Am 18.11.2015 um 09:24 schrieb Heiko Schocher:
    > >Hello Dave,
    > >
    > >Am 17.11.2015 um 22:29 schrieb Dave Gerlach:
    > >>Hi,
    > >>On 11/17/2015 02:24 AM, Heiko Schocher wrote:
    > >>>add support for the am335x based shc board.
    > >>>
    > >>>UART: 0-2 and 4
    > >>>DRAM: 512 MiB
    > >>>MMC: OMAP SD/MMC: 0 @ 26 MHz
    > >>> OMAP SD/MMC: 1 @ 26 MHz
    > >>>I2C: at24 eeprom, pcf8563
    > >>>USB: USB1 (host)
    > >>>
    > >>>Signed-off-by: Heiko Schocher <hs@denx.de>
    > >>>---
    > >>>The following patches are needed to get all working
    > >>>for the shc board:
    > >>>- disable clkout on pcf8563
    > >>> accepted.
    > >>> http://www.spinics.net/lists/devicetree/msg98542.html
    > >>>
    > >>>- leds: leds-gpio: add shutdown function
    > >>> accepted.
    > >>> https://lkml.org/lkml/2015/10/13/169
    > >>>
    > >>>- net: phy: smsc: disable energy detect mode
    > >>> accepted
    > >>> [PATCH v2 2/2] net: phy: smsc: disable energy detect mode
    > >>> https://lkml.org/lkml/2015/10/17/2
    > >>> [PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing
    > >>> https://lkml.org/lkml/2015/10/17/4
    > >>>
    > >>>- ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
    > >>> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html
    > >>> @Dave: What is the current state of this patch?
    > >>> I have the same problem here on this am335x based board
    > >>>
    > >>
    > >>A different approach is being taken for resolving the issue of rtc hwmod on am43x epos evm [1],
    > >>which is what I was attempting to solve with the patch you have linked. We decided to avoid changing
    > >>omap_hwmod code and I haven't been pursuing the ti,no-init flag anymore.
    > >
    > >Maybe I overlook something, but I cannot see, how [1] solves the RTC
    > >hwmod problem on am335x SoC based boards. Not all boards have this problem,
    > >so the RTC hwmod cannot be disabled for all am335x boards ...
    > >
    > >It must be somehow configurable for boards ... I have am335x boards
    > >which use the rtc from the SoC
    >
    > gentle ping ...
    >
    > No more comments on this patch? Is it Ok for mainline or are
    > there more issues?

    Looks OK to me, hoping to start applying the dts changes for v4.5 this
    week.

    Tony

    > >>[1] http://www.spinics.net/lists/linux-omap/msg121987.html


    \
     
     \ /
      Last update: 2015-11-30 17:41    [W:3.409 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site