lkml.org 
[lkml]   [2015]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/3] usb: chipidea: register driver as a peripheral with the phy
From
Date


On 11/23/2015 12:29 AM, Peter Chen wrote:
> On Fri, Nov 20, 2015 at 03:47:20PM -0800, Tim Bird wrote:
>> Register the chipidea driver with the phy, so that the phy
>> driver can kick the gadget driver when it resumes from low power.
>> The phy-msm-usb (Qualcomm) driver requires this in order to
>> recover gadget operation after you disconnect the USB cable
>> and reconnect it.
>>
>> Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
>> ---
>> drivers/usb/chipidea/udc.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
>> index 8223fe7..06234cd 100644
>> --- a/drivers/usb/chipidea/udc.c
>> +++ b/drivers/usb/chipidea/udc.c
>> @@ -1890,6 +1890,12 @@ static int udc_start(struct ci_hdrc *ci)
>>
>> ci->gadget.ep0 = &ci->ep0in->ep;
>>
>> + if (ci->usb_phy) {
>> + retval = otg_set_peripheral(ci->usb_phy->otg, &ci->gadget);
>> + if (retval)
>> + goto destroy_eps;
>> + }
>> +
>> retval = usb_add_gadget_udc(dev, &ci->gadget);
>> if (retval)
>> goto destroy_eps;
>
> Hi Tim,
>
> I am afraid it can't work for current chipidea framework (find this
> problem after testing), the chipidea core manages its host and device
> function using its own API start/stop, it does not define struct usb_otg
> APIs. In fact, it is not reasonable control host and device function
> at PHY driver.

OK. I'm going to re-evaluate the phy-msm-usb.c code, and try to figure out
what it should look like under the current framework.

Thanks for looking at it and testing it. I may have questions as I go.
-- Tim



\
 
 \ /
  Last update: 2015-11-23 21:41    [W:0.054 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site