lkml.org 
[lkml]   [2015]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Hit regression with TCP_TW REUSE/RECYCLE
From
Eric,


On Tue, Nov 17, 2015 at 8:07 PM, Eric Dumazet <eric.dumazet@gmail.com> wrote:
> On Tue, 2015-11-17 at 14:35 +0800, Ethan Zhao wrote:
>> Tested the same case with 4.4-RC1, it was fixed in 4.4-RC1.
>> But don't know which commit fixed it.
>>
>> # echo 1024 65535 > /proc/sys/net/ipv4/ip_local_port_range
>> # cat /proc/sys/net/ipv4/ip_local_port_range
>> 1024 65535
>> # echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse
>> # cat /proc/sys/net/ipv4/tcp_tw_reuse
>> 1
>> # echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle
>> # cat /proc/sys/net/ipv4/tcp_tw_reuse
>> 1
>> # ./accept -n 5 -r &
>> [1] 11866
>> # port: 7954
>> ninst: 5
>> reuseport: 1
>>
>> # ./connect -i 127.0.0.1 -n 5 -d 10
>> 78578.50
>> # uname -a
>> Linux localhost.localdomain 4.4.0-rc1 #49 SMP Tue Nov 17 15:04:18 KST
>> 2015 x86_64 x86_64 x86_64 GNU/Linux
>
> Maybe run a reverse bisection ?

Hmmm, will do.
>
> tcp_tw_reuse and tcp_tw_recycle both set to one have never been
> supported in linux.
>
> tcp_tw_recycle - BOOLEAN
> Enable fast recycling TIME-WAIT sockets. Default value is 0.
> It should not be changed without advice/request of technical
> experts.
>
> tcp_tw_reuse - BOOLEAN
> Allow to reuse TIME-WAIT sockets for new connections when it is
> safe from protocol viewpoint. Default value is 0.
> It should not be changed without advice/request of technical
> experts.
>
> Thanks.
>
>

Thanks,
Ethan


\
 
 \ /
  Last update: 2015-11-20 04:41    [W:0.039 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site