lkml.org 
[lkml]   [2015]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/2] usb: dwc2: host: Clear interrupts before handling them
Date

Hi,

Doug Anderson <dianders@chromium.org> writes:
>>>> isn't this a regression ? You're first clearing the interrupts and only
>>>> then reading to check what's pending, however, what's pending has just
>>>> been cleared. Seems like this should be:
>>>>
>>>> hprt0 = dwc2_readl(HPRT0);
>>>> dwc2_writeal(PRTINT, GINTSTS);
>>>
>>> Actually, we could probably remove the setting of GINTSTS_PRTINT
>>> completely. The docs I have say that the GINTSTS_PRTINT is read only
>>> and that:
>>>
>>>> The core sets this bit to indicate a change in port status of one of the
>>>> DWC_otg core ports in Host mode. The application must read the
>>>> Host Port Control and Status (HPRT) register to determine the exact
>>>> event that caused this interrupt. The application must clear the
>>>> appropriate status bit in the Host Port Control and Status register to
>>>> clear this bit.
>>>
>>> ...so writing PRTINT is probably useless, but John can confirm.
>>>
>>
>> Yup, it seems it can be removed.
>
> How do you guys want this handled? Should I send up a new version of
> this patch? ...or should I send a followon patch that does this
> removal?

I'll leave the final decision to John, but my opinion is that a new
version of the patch would be preferrable.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-11-19 19:41    [W:0.060 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site