lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: kernel BUG at drivers/scsi/scsi_lib.c:1096!
    From
    Date
    On Wed, 2015-11-18 at 09:03 -0500, Mark Salter wrote:
    > On Wed, 2015-11-18 at 20:18 +1100, Michael Ellerman wrote:
    > > Hi folks,
    > >
    > > I'm intermittently seeing the following oops on at least one powerpc box.
    > >
    > > The BUG_ON() is from:
    > >
    > > static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb)
    > > {
    > > ...
    > > count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
    > > BUG_ON(count > sdb->table.nents);
    > >
    > > Looking at the dump it looks like count was 2, I can't work out what nents was.
    > >
    > > The machine's just a fairly boring bare metal setup, with a single IPR adapter:
    > >
    > > 0001:08:00.0 RAID bus controller: IBM PCI-E IPR SAS Adapter (ASIC) (rev 02)
    > > Subsystem: IBM PCIe3 x8 SAS RAID Internal Adapter 6Gb (57D7)
    > > Flags: bus master, fast devsel, latency 0
    > > Kernel driver in use: ipr
    > >
    > >
    > > Anyone seen it before or have any ideas?
    >
    > I'm also seeing it on arm64 in 4.4-rc1

    Ah thanks, that's a good data point. I was assuming it was a driver bug, but I
    assume you're not using IPR :)

    > [ 6.859003] Call trace:
    > [ 6.861439] [<fffffe000074345c>] scsi_init_sgtable+0x84/0x88
    > [ 6.867072] [<fffffe00007434ac>] scsi_init_io+0x4c/0x1ac
    > [ 6.872358] [<fffffe000075004c>] sd_setup_read_write_cmnd+0x44/0x844
    > [ 6.878682] [<fffffe0000750884>] sd_init_command+0x38/0xb0
    > [ 6.884141] [<fffffe00007436e4>] scsi_setup_cmnd+0xd8/0x13c
    > [ 6.889686] [<fffffe000074397c>] scsi_prep_fn+0xc0/0x140
    > [ 6.894973] [<fffffe00003bd0cc>] blk_peek_request+0x148/0x24c
    > [ 6.900692] [<fffffe0000744754>] scsi_request_fn+0x58/0x648
    > [ 6.906237] [<fffffe00003b8e80>] __blk_run_queue+0x40/0x58
    > [ 6.911696] [<fffffe00003b91a4>] blk_run_queue+0x30/0x48
    > [ 6.916983] [<fffffe00007422e4>] scsi_run_queue+0x204/0x294
    > [ 6.922528] [<fffffe000074321c>] scsi_end_request+0x13c/0x1a0
    > [ 6.928247] [<fffffe0000744ef4>] scsi_io_completion+0xf0/0x564
    > [ 6.934052] [<fffffe000073beb0>] scsi_finish_command+0xe4/0x144
    > [ 6.939943] [<fffffe00007446cc>] scsi_softirq_done+0x148/0x178
    > [ 6.945748] [<fffffe00003c39a4>] blk_done_softirq+0x7c/0x94
    > [ 6.951295] [<fffffe00000c8f44>] __do_softirq+0x114/0x2a0
    > [ 6.956667] [<fffffe00000c9340>] irq_exit+0x8c/0xe4
    > [ 6.961522] [<fffffe000009cf00>] handle_IPI+0x170/0x228
    > [ 6.966721] [<fffffe00000904e0>] gic_handle_irq+0xa0/0xb8
    > [ 6.972093] Exception stack(0xfffffe03dc143de0 to 0xfffffe03dc143f00)

    cheers



    \
     
     \ /
      Last update: 2015-11-19 02:21    [W:6.915 / U:0.316 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site