lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] Documentation: dt-bindings: Add DT bindings for Cygnus audio clock
Date
From: Simran Rai <ssimran@broadcom.com>

This patch adds audio clock device tree binding documentation to an
existing Cygnus clock DT bindings document.

Signed-off-by: Simran Rai <ssimran@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Lori Hikichi <lhikichi@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index ede65a5..20e3c00 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -92,6 +92,7 @@ PLL and leaf clock compatible strings for Cygnus are:
"brcm,cygnus-lcpll0"
"brcm,cygnus-mipipll"
"brcm,cygnus-asiu-clk"
+ "brcm,cygnus-audiopll"

The following table defines the set of PLL/clock index and ID for Cygnus.
These clock IDs are defined in:
@@ -131,6 +132,11 @@ These clock IDs are defined in:
ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED

+ audiopll crystal 0 BCM_CYGNUS_AUDIOPLL
+ ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0
+ ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1
+ ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2
+
Northstar and Northstar Plus
------
PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
--
1.9.1


\
 
 \ /
  Last update: 2015-11-18 19:21    [W:0.059 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site