lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V6 RESEND 1/3] reset: hisilicon: document hisi-hi6220 reset controllers bindings
From
Date
Am Freitag, den 30.10.2015, 11:19 +0800 schrieb Chen Feng:
> Add DT bindings documentation for hi6220 SoC reset controller.
>
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> ---
> .../bindings/reset/hisilicon,hi6220-reset.txt | 34 +++++++++++
> include/dt-bindings/reset/hisi,hi6220-resets.h | 67 ++++++++++++++++++++++
> 2 files changed, 101 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> create mode 100644 include/dt-bindings/reset/hisi,hi6220-resets.h
>
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> new file mode 100644
> index 0000000..c74898d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> @@ -0,0 +1,34 @@
> +Hisilicon System Reset Controller
> +======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +The reset controller registers are part of the system-ctl block on
> +hi6220 SoC.
> +
> +Required properties:
> +- compatible: may be "hisilicon,hi6220-sysctrl"
> +- reg: should be register base and length as documented in the
> + datasheet
> +- #reset-cells: 1, see below
> +
> +Example:
> +sys_ctrl: sys_ctrl@f7030000 {
> + compatible = "hisilicon,hi6220-sysctrl", "syscon";
> + reg = <0x0 0xf7030000 0x0 0x2000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> +};
> +
> +Specifying reset lines connected to IP modules
> +==============================================
> +example:
> +
> + uart1: uart1@..... {

uart1: serial@...

regards
Philipp



\
 
 \ /
  Last update: 2015-11-18 18:41    [W:0.057 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site