lkml.org 
[lkml]   [2015]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RESEND PATCH v2 4/6] ARM: dts: Remove broken-cd from eMMC node in exynos5800-peach-pi
    Date
    The eMMC is non-removable so is marked with the non-removable DT
    property to avoid having to redetect it after a suspend/resume.

    But it also has the broken-cd property which is wrong since only
    one of the DT properties for card detection should be used.

    Also remove the card-detect-delay property that is not needed with
    non-removable.

    Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
    Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
    Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
    Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
    ---

    arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 --
    1 file changed, 2 deletions(-)

    diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
    index ca3a467a585d..7b018e451880 100644
    --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
    +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
    @@ -652,12 +652,10 @@
    &mmc_0 {
    status = "okay";
    num-slots = <1>;
    - broken-cd;
    mmc-hs200-1_8v;
    mmc-hs400-1_8v;
    cap-mmc-highspeed;
    non-removable;
    - card-detect-delay = <200>;
    clock-frequency = <800000000>;
    samsung,dw-mshc-ciu-div = <3>;
    samsung,dw-mshc-sdr-timing = <0 4>;
    --
    2.4.3


    \
     
     \ /
      Last update: 2015-11-18 15:01    [W:2.499 / U:0.048 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site