lkml.org 
[lkml]   [2015]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:irq/urgent] irqchip/gic: Make sure all interrupts are deactivated at boot
Commit-ID:  0eece2b22849c90b730815c893425a36b9d10fd5
Gitweb: http://git.kernel.org/tip/0eece2b22849c90b730815c893425a36b9d10fd5
Author: Marc Zyngier <marc.zyngier@arm.com>
AuthorDate: Mon, 16 Nov 2015 19:13:26 +0000
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 17 Nov 2015 14:25:58 +0100

irqchip/gic: Make sure all interrupts are deactivated at boot

When booting a GIC/GICv3 based system, we have no idea what
state the firmware (or previous kernel in the case of kexec)
has left the GIC, and some interrupts may still be active.

In order to garantee that we have a clean state, make sure
the active bits are cleared at init time.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/1447701208-18150-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
drivers/irqchip/irq-gic-common.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index 44a077f..f174ce0 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -84,12 +84,15 @@ void __init gic_dist_config(void __iomem *base, int gic_irqs,
writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);

/*
- * Disable all interrupts. Leave the PPI and SGIs alone
- * as they are enabled by redistributor registers.
+ * Deactivate and disable all SPIs. Leave the PPI and SGIs
+ * alone as they are in the redistributor registers on GICv3.
*/
- for (i = 32; i < gic_irqs; i += 32)
+ for (i = 32; i < gic_irqs; i += 32) {
writel_relaxed(GICD_INT_EN_CLR_X32,
- base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ }

if (sync_access)
sync_access();
@@ -102,7 +105,9 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
+ * Make sure everything is deactivated.
*/
+ writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);


\
 
 \ /
  Last update: 2015-11-17 15:01    [W:0.059 / U:1.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site