lkml.org 
[lkml]   [2015]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 0/3] Dynamic power model from device tree
Date
Viresh Kumar <viresh.kumar@linaro.org> writes:

> On Tue, Nov 17, 2015 at 1:00 AM, Punit Agrawal <punit.agrawal@arm.com> wrote:
>> Hi,
>>
>> This patchset adds support to build a single-coefficient dynamic power
>> model for a CPU. The model is used by the CPU cooling device to
>> provide an estimate of power consumption and also translate allocated
>> power to performance cap.
>>
>> Changes from previous posting -
>>
>> v3 -> v4:
>> arm_big_little: Migrated to using static arrays
>> arm_big_little: Updated Kconfig to support building thermal as module
>>
>> Patch 1 extends the CPU nodes binding to provide an optional dynamic
>> power coefficient which can be used to create a dynamic power model
>> for the CPUs. This model is used to constrain device power consumption
>> (using power_allocator governor) when the system is thermally
>> constrained.
>>
>> Patches 2-3 extends the cpufreq-dt and arm_big_little driver to
>> register cpu cooling devices with the dynamic coefficient when
>> provided.
>>
>> The patches were previously posted at [0][1][2]. Mediatek platform
>> 8173 builds on these bindings to build the power model.
>>
>> If there are no objections, I'd appreciate Acks from device tree
>> bindings maintainers.
>
> You forgot to cc cpufreq maintainers for this and there are good chances
> that I may completely miss the series some times..

Yikes! I'll make sure to include both Rafael and you for future
postings.

> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-11-17 11:21    [W:0.120 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site