Messages in this thread | | | Date | Fri, 13 Nov 2015 08:40:32 -0600 | From | Rob Herring <> | Subject | Re: [PATCH v2 1/9] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings |
| |
On Fri, Nov 13, 2015 at 12:04:06PM +0800, Chen-Yu Tsai wrote: > The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. > It is functionally identical to AXP221; only the regulator default > voltage/status and the external host interface are different. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
> --- > Documentation/devicetree/bindings/mfd/axp20x.txt | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt > index a474359dd206..fd39fa54571b 100644 > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > @@ -5,11 +5,12 @@ axp152 (X-Powers) > axp202 (X-Powers) > axp209 (X-Powers) > axp221 (X-Powers) > +axp223 (X-Powers) > > Required properties: > - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", > - "x-powers,axp221" > -- reg: The I2C slave address for the AXP chip > + "x-powers,axp221", "x-powers,axp223" > +- reg: The I2C slave address or RSB hardware address for the AXP chip > - interrupt-parent: The parent interrupt controller > - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin > - interrupt-controller: The PMIC has its own internal IRQs > @@ -51,7 +52,7 @@ LDO3 : LDO : ldo3in-supply > LDO4 : LDO : ldo24in-supply : shared supply > LDO5 : LDO : ldo5in-supply > > -AXP221 regulators, type, and corresponding input supply names: > +AXP221/AXP223 regulators, type, and corresponding input supply names: > > Regulator Type Supply Name Notes > --------- ---- ----------- ----- > -- > 2.6.2 >
| |