lkml.org 
[lkml]   [2015]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 00/12] usb: early: add support for early printk through USB3 debug port
From
Date


On 11/13/2015 10:26 AM, Dave Young wrote:
> On 11/13/15 at 10:04am, Lu, Baolu wrote:
>> Hi Dave,
>>
>> On 11/12/2015 02:01 PM, Dave Young wrote:
>>> Hi, Baolu
>>>
>>> On 11/12/15 at 10:45am, Lu, Baolu wrote:
>>>>> Hi Dave,
>>>>>
>>>>> Which device are you testing with? This implementation was developed
>>>>> and tested on Intel Skylake devices.
>>>>>
>>>>> It doesn't surprise me if it doesn't work with other silicons. But it do
>>>>> remind me to create a verified-list and put those known-to-work devices
>>>>> in it.
>>>>>
>>> I have not got time to do more test. What infomation do you want?
>>> lsusb -v?
>> lspci -v
>>
> Here is the controller information:
>
> Host side:
>
> 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI])
> Subsystem: Hewlett-Packard Company Device 1905
> Flags: bus master, medium devsel, latency 0, IRQ 27
> Memory at ef120000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: xhci_hcd
>
> Target side:
>
> 00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04) (prog-if 30 [XHCI])
> Subsystem: Lenovo Device 220c
> Flags: bus master, medium devsel, latency 0, IRQ 41
> Memory at f0620000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: xhci_hcd

Okay, thank you.

Thanks,
-Baolu

> Thanks
> Dave
>



\
 
 \ /
  Last update: 2015-11-13 07:41    [W:0.058 / U:1.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site