lkml.org 
[lkml]   [2015]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
Am 2015-11-11 um 20:08 schrieb Lars-Peter Clausen:
> On 11/11/2015 07:38 PM, Martin Kepplinger wrote:
>> This adds freefall event detection to the supported devices. It adds the
>> in_accel_x&y&z_mag_falling_en iio event attribute, which activates
>> freefall mode.
>>
>
> Hi,
>
> Thanks for the patch, looks pretty good. Just a few things.
>
>> In freefall mode, the current acceleration values of all activated axis
>> are added and if the *sum* falls *under* the threshold specified
>
> Are you sure its not the magnitude of the vector rather than the sum of the
> individual components?

It's the acceleration magnitude, logical AND combination of the values.
Will correct this for v2.

>
>> (in_accel_mag_falling_value), the appropriate IIO event code is
>> generated.
> [...]
>> +enum { + axis_x, + axis_y, + axis_z, +};
>
> That should be part of patch two I guess.

Will do.

>
> [...]
>> +static IIO_DEVICE_ATTR_NAMED(accel_xayaz_mag_falling_en, +
>> in_accel_x&y&z_mag_falling_en, + S_IRUGO | S_IWUSR, +
>> mma8452_get_freefall_mode, + mma8452_set_freefall_mode, + 0);
>
> This should be created by the core based on the event spec, shouldn't it?
>

I'll check if this works when I get to it.

thanks for the review!

martin



\
 
 \ /
  Last update: 2015-11-12 16:21    [W:0.927 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site