lkml.org 
[lkml]   [2015]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 07/10] pwm: gpio: Add a generic gpio based PWM driver
On Mon, Oct 26, 2015 at 4:32 PM, Olliver Schinagl
<o.schinagl@ultimaker.com> wrote:
> From: Olliver Schinagl <oliver@schinagl.nl>
>
> This patch adds a bit-banging gpio PWM driver. It makes use of hrtimers,
> to allow nano-second resolution, though it obviously strongly depends on
> the switching speed of the gpio pins, hrtimer and system load.
>
> Each pwm node can have 1 or more "pwm-gpio" entries, which will be
> treated as pwm's as part of a pwm chip.
>
> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
> ---
> Documentation/devicetree/bindings/pwm/pwm-gpio.txt | 18 ++
> MAINTAINERS | 5 +
> drivers/pwm/Kconfig | 15 ++
> drivers/pwm/Makefile | 1 +
> drivers/pwm/pwm-gpio.c | 253 +++++++++++++++++++++
> 5 files changed, 292 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-gpio.txt
> create mode 100644 drivers/pwm/pwm-gpio.c
>
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-gpio.txt b/Documentation/devicetree/bindings/pwm/pwm-gpio.txt
> new file mode 100644
> index 0000000..336f61f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/pwm-gpio.txt
> @@ -0,0 +1,18 @@
> +Generic GPIO bit-banged PWM driver
> +
> +Required properties:
> + - compatible: should be "pwm-gpio"
> + - #pwm-cells: should be 3, see pwm.txt in this directory for a general
> + description of the cells format.
> + - pwm-gpios: one or more gpios describing the used gpio, see the gpio
> + bindings for the used gpio driver.

I'm not sure there is really much advantage to having multiple gpios
per node. It would simplify the driver a bit not to, but I don't feel
strongly either way.

> +
> +Example:
> +#include <dt-bindings/gpio/gpio.h>
> +
> + pwm: pwm@0 {

Unit address should be associated with a reg property, so drop it.

> + compatible = "pwm-gpio";
> + #pwm-cells = 3;
> + pwm-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
> + pwm-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;

This would not actually compile. You can't have 2 properties of the same name.

> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7ba7ab7..0ae7fbf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4555,6 +4555,11 @@ F: drivers/i2c/muxes/i2c-mux-gpio.c
> F: include/linux/i2c-mux-gpio.h
> F: Documentation/i2c/muxes/i2c-mux-gpio
>
> +GENERIC GPIO PWM DRIVER
> +M: Olliver Schinagl <oliver@schinagl.nl>
> +S: Maintained
> +F: drivers/pwm/pwm-gpio.c

Can you add the binding doc too.

Rob


\
 
 \ /
  Last update: 2015-10-27 09:01    [W:0.141 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site