lkml.org 
[lkml]   [2015]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3] dmaengine: fsl-edma: add PM suspend/resume support
Date
Hi Vinod,

Thanks for your review.
I did the test and it seems that it should be ok when CONFIG_PM is not defined.
So I removed the protection code to make it more readable.
Do you think is it ok?

Best Regards,
Yuan Yao

> -----Original Message-----
> From: Vinod Koul [mailto:vinod.koul@intel.com]
> Sent: Tuesday, October 27, 2015 10:01 AM
> To: Yuan Yao-B46683 <yao.yuan@freescale.com>
> Cc: stefan@agner.ch; arnd@arndb.de; dan.j.williams@intel.com;
> dmaengine@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v3] dmaengine: fsl-edma: add PM suspend/resume
> support
>
> On Mon, Oct 19, 2015 at 04:31:05PM +0800, Yuan Yao wrote:
>
> The patch overall looks fine, but
> >
> > +static int fsl_edma_suspend_late(struct device *dev)
>
> This needs protection and will have build failure when CONFIG_PM is not
> defined
>
> > +{
> > + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
> > + struct fsl_edma_chan *fsl_chan;
> > + unsigned long flags;
> > + int i;
> > +
> > + for (i = 0; i < fsl_edma->n_chans; i++) {
> > + fsl_chan = &fsl_edma->chans[i];
> > + spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> > + /* Make sure chan is idle or will force disable. */
> > + if (unlikely(!fsl_chan->idle)) {
> > + dev_warn(dev, "WARN: There is non-idle channel.");
> > + fsl_edma_disable_request(fsl_chan);
> > + fsl_edma_chan_mux(fsl_chan, 0, false);
> > + }
> > +
> > + fsl_chan->pm_state = SUSPENDED;
> > + spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int fsl_edma_resume_early(struct device *dev) {
> > + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
> > + struct fsl_edma_chan *fsl_chan;
> > + int i;
> > +
> > + for (i = 0; i < fsl_edma->n_chans; i++) {
> > + fsl_chan = &fsl_edma->chans[i];
> > + fsl_chan->pm_state = RUNNING;
> > + edma_writew(fsl_edma, 0x0, fsl_edma->membase +
> EDMA_TCD_CSR(i));
> > + if (fsl_chan->slave_id != 0)
> > + fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id,
> true);
> > + }
> > +
> > + edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA,
> > + fsl_edma->membase + EDMA_CR);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops fsl_edma_pm_ops = {
> > + .suspend_late = fsl_edma_suspend_late,
> > + .resume_early = fsl_edma_resume_early,
> > +};
>
> This one too, also why use late and early, pls add the note here
>
> > static const struct of_device_id fsl_edma_dt_ids[] = {
> > { .compatible = "fsl,vf610-edma", },
> > { /* sentinel */ }
> > @@ -969,6 +1042,7 @@ static struct platform_driver fsl_edma_driver = {
> > .driver = {
> > .name = "fsl-edma",
> > .of_match_table = fsl_edma_dt_ids,
> > + .pm = &fsl_edma_pm_ops,
> This will fail too if CONFIG_PM is not defined
>
> --
> ~Vinod


\
 
 \ /
  Last update: 2015-10-27 05:21    [W:0.040 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site