lkml.org 
[lkml]   [2015]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] ARM: dts: qcom: msm8974-honami: Add sdhci1 node
Date
Introduce the eMMC sdhci node and its pinctrl state.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
.../boot/dts/qcom-msm8974-sony-xperia-honami.dts | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 8c0753a32b20..de3529d1a8ca 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -277,6 +277,19 @@
};

&soc {
+ sdhci@f9824900 {
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+ };
+
serial@f991e000 {
status = "ok";

@@ -302,6 +315,20 @@
bias-disable;
};
};
+
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
};
};

--
2.4.2


\
 
 \ /
  Last update: 2015-10-21 07:41    [W:0.072 / U:2.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site