lkml.org 
[lkml]   [2015]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/5] Fix regression introduced by set_irq_flags() removal
On Tue, Oct 20, 2015 at 04:08:28PM +0200, Thomas Petazzoni wrote:
> As discussed on IRC, another simpler (code line wise) solution is to
> simply clear the IRQ_NOAUTOEN flag in the irq-armada-370-xp, which
> brings us back to what set_irq_flags() was doing, without actually
> reverting Rob's patch.
>
> However, relying on IRQ_NOAUTOEN being cleared doesn't seem like the
> right long term solution, which is why I implemented what I believe is
> a (hopefully) better long term solution.

However, this is rather worrying. NOAUTOEN is supposed to avoid enabling
the interrupt when the interrupt is claimed.

If, as a result of Rob's patch, we now have a load of IRQs which are
marked with NOAUTOEN which weren't, that's quite a large regression -
possibly one which hasn't been properly found (not everyone tests -rc
kernels) and we may be better to revert Rob's patch to avoid lots of
breakge being reported when 4.3 is released.

I think Rob's patches need another review in light of this, to determine
how much breakage there is here, and a decision how to proceed made on
that basis.

--
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2015-10-20 16:21    [W:0.197 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site