lkml.org 
[lkml]   [2015]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] dmaengine: axi_dmac: Add synchronization support
Date
Implement the new device_synchronize() callback to allow proper
synchronization when stopping a channel. Since the driver already makes
sure that no new complete callbacks are scheduled after the
device_terminate_all() callback has been called, all left to do in the
device_synchronize() callback is to wait for all currently running complete
callbacks to finish.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/dma/dma-axi-dmac.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index 5b2395e..c346809 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -307,6 +307,13 @@ static int axi_dmac_terminate_all(struct dma_chan *c)
return 0;
}

+static void axi_dmac_synchronize(struct dma_chan *c)
+{
+ struct axi_dmac_chan *chan = to_axi_dmac_chan(c);
+
+ vchan_synchronize(&chan->vchan);
+}
+
static void axi_dmac_issue_pending(struct dma_chan *c)
{
struct axi_dmac_chan *chan = to_axi_dmac_chan(c);
@@ -613,6 +620,7 @@ static int axi_dmac_probe(struct platform_device *pdev)
dma_dev->device_prep_dma_cyclic = axi_dmac_prep_dma_cyclic;
dma_dev->device_prep_interleaved_dma = axi_dmac_prep_interleaved;
dma_dev->device_terminate_all = axi_dmac_terminate_all;
+ dma_dev->device_synchronize = axi_dmac_synchronize;
dma_dev->dev = &pdev->dev;
dma_dev->chancnt = 1;
dma_dev->src_addr_widths = BIT(dmac->chan.src_width);
--
2.1.4


\
 
 \ /
  Last update: 2015-10-20 12:21    [W:0.065 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site