lkml.org 
[lkml]   [2015]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/4] vfio: platform: reset: calxedaxgmac: add reset function registration
Date
On Monday 19 October 2015 15:17:30 Eric Auger wrote:
> Hi Arnd,
> On 10/19/2015 03:04 PM, Arnd Bergmann wrote:
> > On Sunday 18 October 2015 18:00:13 Eric Auger wrote:
> >> diff --git a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
> >> index 619dc7d..4f76b17 100644
> >> --- a/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
> >> +++ b/drivers/vfio/platform/reset/vfio_platform_calxedaxgmac.c
> >> @@ -29,8 +29,7 @@
> >> #define DRIVER_VERSION "0.1"
> >> #define DRIVER_AUTHOR "Eric Auger <eric.auger@linaro.org>"
> >> #define DRIVER_DESC "Reset support for Calxeda xgmac vfio platform device"
> >> -
> >> -#define CALXEDAXGMAC_COMPAT "calxeda,hb-xgmac"
> >> +#define COMPAT "calxeda,hb-xgmac"
> >
> > Why the rename?
> This define was not used. Since the code is meant to be duplicated from
> one reset module to the other I thought it did not bring any have a
> specialized name

I'd say it would be clearer to remove the macro then, and pass the
string literal in the function call.

> >> /* XGMAC Register definitions */
> >> #define XGMAC_CONTROL 0x00000000 /* MAC Configuration */
> >> @@ -80,6 +79,43 @@ int vfio_platform_calxedaxgmac_reset(struct vfio_platform_device *vdev)
> >> }
> >> EXPORT_SYMBOL_GPL(vfio_platform_calxedaxgmac_reset);
> >>
> >> +static int __init vfio_platform_calxedaxgmac_init(void)
> >> +{
> >> + int (*register_reset)(struct module *, char*,
> >> + vfio_platform_reset_fn_t);
> >> + int ret;
> >> +
> >> + register_reset = symbol_get(vfio_platform_register_reset);
> >> + if (!register_reset)
> >> + return -EINVAL;
> >
> > I don't understand what you do the symbol_get() here for.
> > Why not just call that function directly
> the function is implemented in a separate module. This is just to make
> sure the vfio-platform module is loaded, in case the end-user attempts
> to load the reset module without having this latter loaded.

The module loader does all this for you.

Arnd


\
 
 \ /
  Last update: 2015-10-19 15:41    [W:0.085 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site