lkml.org 
[lkml]   [2015]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7] phy: exynos-usb2: add vbus regulator support
Date
From: Marek Szyprowski <m.szyprowski@samsung.com>

Exynos USB2 PHY has separate power supply, which is usually provided by
VBUS regulator. This patch adds support for it. VBUS regulator is
optional, to keep compatibility with boards, which have VBUS provided
from some always-on power source.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/samsung-phy.txt | 3 +++
drivers/phy/phy-samsung-usb2.c | 25 ++++++++++++++++++--
drivers/phy/phy-samsung-usb2.h | 2 ++
3 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 60c6f2a..0289d3b 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -44,6 +44,9 @@ Required properties:
- the "ref" clock is used to get the rate of the clock provided to the
PHY module

+Optional properties:
+- vbus-supply: power-supply phandle for vbus power source
+
The first phandle argument in the PHY specifier identifies the PHY, its
meaning is compatible dependent. For the currently supported SoCs (Exynos 4210
and Exynos 4212) it is as follows:
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c
index f278a9c..1d22d93 100644
--- a/drivers/phy/phy-samsung-usb2.c
+++ b/drivers/phy/phy-samsung-usb2.c
@@ -27,6 +27,13 @@ static int samsung_usb2_phy_power_on(struct phy *phy)

dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
inst->cfg->label);
+
+ if (drv->vbus) {
+ ret = regulator_enable(drv->vbus);
+ if (ret)
+ goto err_regulator;
+ }
+
ret = clk_prepare_enable(drv->clk);
if (ret)
goto err_main_clk;
@@ -48,6 +55,9 @@ err_power_on:
err_instance_clk:
clk_disable_unprepare(drv->clk);
err_main_clk:
+ if (drv->vbus)
+ regulator_disable(drv->vbus);
+err_regulator:
return ret;
}

@@ -55,7 +65,7 @@ static int samsung_usb2_phy_power_off(struct phy *phy)
{
struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
struct samsung_usb2_phy_driver *drv = inst->drv;
- int ret;
+ int ret = 0;

dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
inst->cfg->label);
@@ -68,7 +78,10 @@ static int samsung_usb2_phy_power_off(struct phy *phy)
}
clk_disable_unprepare(drv->ref_clk);
clk_disable_unprepare(drv->clk);
- return 0;
+ if (drv->vbus)
+ ret = regulator_disable(drv->vbus);
+
+ return ret;
}

static const struct phy_ops samsung_usb2_phy_ops = {
@@ -203,6 +216,14 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev)
return ret;
}

+ drv->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(drv->vbus)) {
+ ret = PTR_ERR(drv->vbus);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ drv->vbus = NULL;
+ }
+
for (i = 0; i < drv->cfg->num_phys; i++) {
char *label = drv->cfg->phys[i].label;
struct samsung_usb2_phy_instance *p = &drv->instances[i];
diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/phy-samsung-usb2.h
index 44bead9..6563e7c 100644
--- a/drivers/phy/phy-samsung-usb2.h
+++ b/drivers/phy/phy-samsung-usb2.h
@@ -17,6 +17,7 @@
#include <linux/device.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
+#include <linux/regulator/consumer.h>

#define KHZ 1000
#define MHZ (KHZ * KHZ)
@@ -37,6 +38,7 @@ struct samsung_usb2_phy_driver {
const struct samsung_usb2_phy_config *cfg;
struct clk *clk;
struct clk *ref_clk;
+ struct regulator *vbus;
unsigned long ref_rate;
u32 ref_reg_val;
struct device *dev;
--
1.7.9.5


\
 
 \ /
  Last update: 2015-10-17 22:41    [W:0.049 / U:1.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site