lkml.org 
[lkml]   [2015]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 1/2] arm64: kvm: allows kvm cpu hotplug
From
Date
James,

I reproduced the problem on Hikey board, but

On 10/13/2015 07:43 PM, James Morse wrote:
> Hi,
>
> On 13/10/15 06:38, AKASHI Takahiro wrote:
>> On 10/12/2015 10:28 PM, James Morse wrote:
>>> On 29/05/15 06:38, AKASHI Takahiro wrote:
>>>> The current kvm implementation on arm64 does cpu-specific initialization
>>>> at system boot, and has no way to gracefully shutdown a core in terms of
>>>> kvm. This prevents, especially, kexec from rebooting the system on a boot
>>>> core in EL2.
>>>>
>>>> This patch adds a cpu tear-down function and also puts an existing cpu-init
>>>> code into a separate function, kvm_arch_hardware_disable() and
>>>> kvm_arch_hardware_enable() respectively.
>>>> We don't need arm64-specific cpu hotplug hook any more.
>>>
>>> I think we do... on platforms where cpuidle uses psci to temporarily turn
>>> off cores that aren't in use, we lose the el2 state. This hotplug hook
>>> restores the state, even if there a no vms running.
>
> I've just noticed there are two cpu notifiers - we may be referring to
> different ones. (hyp_init_cpu_pm_nb and hyp_init_cpu_nb)
>
>
>> If I understand you correctly, with or without my patch, kvm doesn't work
>> under cpuidle anyway. Right?
>
> It works with, and without, v4.
> This patch v5 causes the problem.
>
>
>> If so, saving/restoring cpu states (or at least, kicking cpu hotplug hooks)
>> is cpuidle driver's responsibility, isn't it?
>
> Yes - but with v5, (at least one of) the hotplug hooks isn't having the
> same effect as before:
>
> Before v5, cpu_init_hyp_mode() is called via cpu_notify() each time
> cpu_suspend() suspends/wakes-up the core.
>
> Logically it should be the 'pm' notifier that does this work:
>> if (cmd == CPU_PM_EXIT &&
>> __hyp_get_vectors() == hyp_default_vectors) {
>> cpu_init_hyp_mode(NULL);
>> return NOTIFY_OK;
>>
>
> With v5, kvm_arch_hardware_enable() isn't called each time cpu_suspend()
> cycles the core.

Right. I misunderstood kvm_arm_get_running_vcpu().

> The problem appears to be this hunk, affecting the above code:
>> - if (cmd == CPU_PM_EXIT &&
>> - __hyp_get_vectors() == hyp_default_vectors) {
>> - cpu_init_hyp_mode(NULL);
>> + if (cmd == CPU_PM_EXIT && kvm_arm_get_running_vcpu()) {
>> + kvm_arch_hardware_enable();
>
> Changing this to just rename cpu_init_hyp_mode() to
> kvm_arch_hardware_enable() solves the problem.

The change that you suggested won't work well because kvm needs to maintain
cpu state with 'kvm_usage_count' using kvm_arch_hardware_enable/disable().
With this changed applied, you won't be able to do kexec.

I'm going to try more generic PM hook.

Thanks,
-Takahiro AKASHI

> Presumably kvm_arm_get_running_vcpu() evaluates to false before the first
> vm is started, meaning no vms can be started if pm events occur before
> starting the first vm.
>
> Sorry I blamed the wrong cpu notifier hook - I didn't realise there were two!
>
>
> Thanks,
>
> James
>
>
>>> This patch prevents me from running vms on such a platform, qemu gives:
>>>> kvm [1500]: Unsupported exception type: 6264688KVM internal error.
>>> Suberror: 0
>>>
>>> kvmtool goes with a more dramatic:
>>>> KVM exit reason: 17 ("KVM_EXIT_INTERNAL_ERROR")
>>>
>>> Disabling CONFIG_ARM_CPUIDLE solves this problem.
>>>
>>>
>>> (Sorry to revive an old thread - I've been using v4 of this patch for the
>>> hibernate/suspend-to-disk series).
>>>
>>>
>>>> Since this patch modifies common part of code between arm and arm64, one
>>>> stub definition, __cpu_reset_hyp_mode(), is added on arm side to avoid
>>>> compiling errors.
>>>>
>>>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>>>
>>>> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
>>>> index fd085ec..afe6263 100644
>>>> --- a/arch/arm64/kvm/hyp.S
>>>> +++ b/arch/arm64/kvm/hyp.S
>>>> @@ -1136,6 +1136,11 @@ ENTRY(kvm_call_hyp)
>>>> ret
>>>> ENDPROC(kvm_call_hyp)
>>>>
>>>> +ENTRY(kvm_call_reset)
>>>> + hvc #HVC_RESET
>>>> + ret
>>>> +ENDPROC(kvm_call_reset)
>>>> +
>>>> .macro invalid_vector label, target
>>>> .align 2
>>>> \label:
>>>> @@ -1179,10 +1184,27 @@ el1_sync: // Guest trapped
>>>> into EL2
>>>> cmp x18, #HVC_GET_VECTORS
>>>> b.ne 1f
>>>> mrs x0, vbar_el2
>>>> - b 2f
>>>> -
>>>> -1: /* Default to HVC_CALL_HYP. */
>>>> + b do_eret
>>>>
>>>> + /* jump into trampoline code */
>>>> +1: cmp x18, #HVC_RESET
>>>> + b.ne 2f
>>>> + /*
>>>> + * Entry point is:
>>>> + * TRAMPOLINE_VA
>>>> + * + (__kvm_hyp_reset - (__hyp_idmap_text_start & PAGE_MASK))
>>>> + */
>>>> + adrp x2, __kvm_hyp_reset
>>>> + add x2, x2, #:lo12:__kvm_hyp_reset
>>>> + adrp x3, __hyp_idmap_text_start
>>>> + add x3, x3, #:lo12:__hyp_idmap_text_start
>>>> + and x3, x3, PAGE_MASK
>>>> + sub x2, x2, x3
>>>> + ldr x3, =TRAMPOLINE_VA
>>>> + add x2, x2, x3
>>>> + br x2 // no return
>>>> +
>>>> +2: /* Default to HVC_CALL_HYP. */
>>>
>>> What was the reason not to use kvm_call_hyp(__kvm_hyp_reset, ...)?
>>> (You mentioned you wanted to at [0] - I can't find the details in the
>>> archive)
>>>
>>>
>>> Thanks,
>>>
>>> James
>>>
>>>
>>> [0] http://lists.infradead.org/pipermail/kexec/2015-April/335533.html


\
 
 \ /
  Last update: 2015-10-15 12:21    [W:0.164 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site