Messages in this thread Patch in this message | | | From | Maxime Coquelin <> | Subject | [PATCH 4/4] ARM: dts: Enable Ethernet on STi's B2199 board | Date | Thu, 1 Oct 2015 17:56:22 +0200 |
| |
The B2199 board is mounted with Realtek RTL8367 switch. We consider the bootloader will have intiliazed the switch before jumping into the kernel, so we declare it as a fixed link.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> --- arch/arm/boot/dts/stih418-b2199.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 82eee39..772d2bb 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -24,6 +24,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; soc { @@ -101,5 +102,12 @@ st_dwc3: dwc3@8f94000 { status = "okay"; }; + + ethernet0: dwmac@9630000 { + st,tx-retime-src = "clkgen"; + status = "okay"; + phy-mode = "rgmii"; + fixed-link = <0 1 1000 0 0>; + }; }; }; -- 1.9.1
| |