lkml.org 
[lkml]   [2015]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 4/5] xhci: mediatek: support MTK xHCI host controller
From
Date
On 29/09/15 04:01, Chunfeng Yun wrote:
> There some vendor quirks for MTK xhci host controller:
> 1. It defines some extra SW scheduling parameters for HW
> to minimize the scheduling effort for synchronous and
> interrupt endpoints. The parameters are put into reseved
> DWs of slot context and endpoint context.
> 2. Its IMODI unit for Interrupter Moderation register is
> 8 times as much as that defined in xHCI spec.
> 3. Its TDS in Normal TRB defines a number of packets that
> remains to be transferred for a TD after processing all
> Max packets in all previous TRBs.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>

I've done some basic soak tests, both with a directly attached USB3 HDD
and, given the extra code to manage isochronous xfer, also with a hub,
disc and two audio interfaces.

Tested-by: Daniel Thompson <daniel.thompson@linaro.org>


> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 57f40a1..243f696 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -68,6 +68,7 @@
> #include <linux/slab.h>
> #include "xhci.h"
> #include "xhci-trace.h"
> +#include "xhci-mtk.h"
>
> /*
> * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
> @@ -3044,18 +3045,27 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
> struct urb *urb, unsigned int num_trbs_left)
> {
> u32 maxp, total_packet_count;
> + u32 skip_current_trb = 0;

A bit of a nitpick but why do we need skip_current_trb? Testing
(xhci->quirks & XHCI_MTK_HOST) twice would make what the code does, and
why, more obvious.

Anyhow with that looked at, and the caveat that I'm not much of USB
expert, you're welcome to add my Reviewed-by: to v10.

>
> - if (xhci->hci_version < 0x100)
> - return ((td_total_len - transferred) >> 10);
> -
> - maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
> - total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
> + if (xhci->hci_version < 0x100) {
> + /* for MTK xHCI, TD size doesn't include this TRB */
> + if (xhci->quirks & XHCI_MTK_HOST)
> + skip_current_trb = 1;
> + else
> + return ((td_total_len - transferred) >> 10);
> + }
>
> /* One TRB with a zero-length data packet. */
> if (num_trbs_left == 0 || (transferred == 0 && trb_buff_len == 0) ||
> trb_buff_len == td_total_len)
> return 0;
>
> + if (skip_current_trb)
> + trb_buff_len = 0;
> +
> + maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
> + total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
> +
> /* Queueing functions don't count the current TRB into transferred */
> return (total_packet_count - ((transferred + trb_buff_len) / maxp));
> }


Daniel.



\
 
 \ /
  Last update: 2015-10-01 14:01    [W:0.185 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site